Epson 755c Quick Start

Epson 755c - PowerLite XGA LCD Projector Manual

Get Epson 755c - PowerLite XGA LCD Projector PDF manuals and user guides
UPC - 010343855366
View all Epson 755c manuals
Add to My Manuals
Save this manual to your list of manuals

Epson 755c manual content summary:

  • Epson 755c | Quick Start - Page 1
    Epson® PowerLite® 755c/ 765c Quick Setup 2 Turn the focus ring to sharpen the image. Turn the zoom ring to reduce or enlarge the image. 1 Turn On Your Equipment 1 Connect the power cord to the back of the projector and plug the other end into an electrical outlet. 2 Remove the lens cover. Focus
  • Epson 755c | Quick Start - Page 2
    11g or 802.11b wireless network from a computer running Windows 98, 2000, Me, XP, or Macintosh OS X 10.2.4 or above. NOTE: You must have already installed the projector's EasyMP (EMP NS Connection) software and configured your projector and computer. See the User's Guide for instructions. Also, your
  • 1
  • 2
2
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
3
If your image looks like
or
, you’ve placed the projector off
to one side of the screen at an angle. Place it directly in front of the
screen, facing the screen squarely.
4
If your image looks like
or
, press the
or
buttons on
the projector to correct it.
Epson
®
PowerLite
®
755c/765c
Quick Setup
1
Turn On Your Equipment
1
Connect the power cord to the back of the projector and plug the other
end into an electrical outlet.
2
Remove the lens cover.
3
Remove the battery cover on the remote control. Locate the batteries
that came with the projector and insert them as shown. Then replace
the battery cover.
4
To turn the projector on, press the red
Power
button on the
projector or the remote control. The projector beeps once, and the
projector’s
Power
light flashes green and then stays on.
CAUTION: Before unplugging the projector...
Shut the projector down properly:
1.
Press the
Power
button twice.
2.
When the orange light stops flashing and the projector beeps,
you can unplug the projector.
How do you want to get images to the projector?
•
To connect to a notebook, see “If connecting
to a notebook” below.
•
To project over an 802.11g/b network, see
“If projecting wirelessly” on the back of this sheet.
You must have installed the projector’s EasyMP
TM
software and configured your projector and
computer before you can project wirelessly.
See your
User’s Guide
for instructions.
•
To give a presentation stored on a memory card,
see Chapter 5 in your
User’s Guide
.
If connecting to a notebook...
1
Make sure you’ve turned on the projector and adjusted the image
as described in sections 1 and 2.
2
Locate the computer cable that came with the projector. Connect
one end to the projector’s blue
Computer/Component Video
port.
Connect the other end to your notebook’s video-out port or
monitor port. If you can’t connect the cable to your
PowerBook
®
, you may need to use an adapter. See your
PowerLite 755c/765c User’s Guide
for instructions.
3
Press the
Source Search
button on the projector until your
computer image is displayed.
3
Choose a
Presentation Method
1
To raise the image, press the blue foot release button for the front
adjustable foot and lift the front. Release the button to lock the
foot in position.
2
Adjust the Image
Zoom
Focus
Computer cable
Wireless card