Epson 755c Quick Start - Page 2

4 If you see a blank screen or you don't see the image you are trying to project from your computer, make sure the Power light on the projector is green and not flashing, and the lens cover is off. If the screen is still blank, restart your notebook, or press the Source Search button on the projector again. Windows®: Hold down the Fn button on the keyboard and press the function key that lets you display on an external monitor. It may have an icon such as , or it may be labeled CRT/LCD. 5 If your projector and notebook don't display the same image, do the following: Windows: Try using the CRT/LCD or function key, as described above. If this doesn't work, double-click Display in the Windows Control Panel. Make sure both the LCD screen and monitor port are enabled. (Allow a few seconds for the projector to sync up.) See your Windows online help for details. Macintosh® OS X: From the Apple menu, select System Preferences, then click Displays. Select the VGA Display or Color LCD dialog box, click the Arrangement (or Arrange) tab, and make sure Mirror Displays is checked. Click here Make sure this is checked Macintosh OS 9 or earlier: From the Apple menu, select Control Panels, then click Monitors or Monitors and Sound. Click the Arrange icon, then drag one monitor icon on top of the other; this lets you display on both the projection screen and the LCD screen. If this option isn't available, click the Monitor icon and select a Simulscan resolution. Click here Drag one monitor icon onto the other 6 If you see an image but it's not displayed correctly, press the Auto button on the remote control to automatically readjust it. If projecting wirelessly... Follow the steps in this section to project over an 802.11g or 802.11b wireless network from a computer running Windows 98, 2000, Me, XP, or Macintosh OS X 10.2.4 or above. NOTE: You must have already installed the projector's EasyMP (EMP NS Connection) software and configured your projector and computer. See the User's Guide for instructions. Also, your computer must have an 802.11g or 802.11b network card or transmitter installed. 1 Make sure you've turned on the projector and adjusted the image as described in sections 1 and 2 on the front of this sheet. 2 Select EasyMP as the source by pressing the EasyMP button on the remote control. 3 Insert the Epson 802.11g card with the label facing upward, as shown. When fully inserted, the end of the card will protrude. NOTE: Use only the Epson 802.11g card. Other brands may not be compatible and are not guaranteed to work. Once the card is inserted, the projector displays a screen like this: Projector keyword (optional) 4 Windows: From the Start menu, select EMP NS Connection. Macintosh OS X: Double-click the EMP NS Connection icon in your Applications folder. 5 If you see this screen, select the name and IP address for your computer's 802.11g or 802.11b wireless card and click OK. You see this screen: Select your projector If the connection is working properly, you see your projector listed. If you don't see your projector listed, restart your computer. If it still doesn't appear, see the User's Guide for help. 6 Once the name of your projector appears, select it and click Connect. If a projector is in use and is "locked" to prevent interruption, you won't be able to select it. 7 If you see a message asking for a keyword, enter the four digits that appear on the EasyMP Network Screen and click OK. (See the screen at the top of this column to locate the projector keyword.) You see the image on your monitor transmitted to the projector, and a floating control bar appears on the computer screen: Click here to minimize 8 When you're done with your presentation, click Disconnect on the control bar. Where To Get Help Telephone Support Services To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card that came with your projector. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers: U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday through Friday Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday Toll or long distance charges may apply. Electronic Support Services Epson provides assistance through electronic support services 24 hours a day at http://support.epson.com. For tips, templates, and training for developing successful presentations go to http://www.presentersonline.com. Register today to get product updates, special promotions, and customer-only offers. You can use the registration card or CD included with your projector, or register online at www.epson.com/webreg. Epson is a registered trademark and EasyMP is a trademark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc. General Notice: Other product names are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. © 2005 Epson America, Inc. 6/05 CPD-20251 Printed in XXXXXXXXX