Epson 820p Quick Start - Page 1

TART S HERE Connect the projector to your laptop For most setups, you'll need just these two cables: EPSON® PowerLite® 600p/811p/820p Quick Setup power cord computer cable 1 Make sure your projector and laptop are turned off. 2 Connect one end of the computer cable to the Computer/Component Video port on the projector. 3 Connect the other end to your laptop's video or monitor port. Follow these instructions to connect the projector to your laptop. To connect other devices, such as a VCR or desktop PC, see your User's Guide. Plug in your projector Connect the power cord to your projector and plug the other end into a grounded outlet. Turn on your equipment 1 Remove the lens cover. 2 Turn on the projector first. To do so, press the red Power button. The power light flashes green as the projector warms up, and the projection lamp comes on in about 30 seconds. power light power button 3 Turn on or restart your laptop. (Windows® only: If you see a New Hardware Wizard screen for a Plug and Play monitor, click Cancel.) Caution: Before unplugging the projector... Press the red Power button twice, then let the projector cool while the power light flashes orange (about a minute and a half). Once the light stops flashing and stays on, it's safe to unplug the projector. Never unplug the projector when the power light is green or flashing orange. Turn over