Epson 8300NL Product Support Bulletin(s) - Page 31
Originator, Authorization, Reference, Total s, Products, Subject, Reason, Action - powerlite lamp
UPC - 010343846029
View all Epson 8300NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
EPSON PRODUCT SUPPORT BULLETIN Date: PSB #: Reference: Product(s): Subject: 06/06/2005 Originator: JD PSB.2005.06.001 Authorization: N/A Total Pages: 3 Powerlite 8300/8300 with EasyMP.net/9300 series Projectors Filter-Cleaning Procedures This bulletin was created to inform users about the filter-cleaning procedures necessary for maintaining proper airflow and reducing the potential for overheating. Reason: The PowerLite 8300 and 9300 series projectors have five (5) filters that must be cleaned on a regular basis. Cleaning the filters is critical to maintaining proper airflow inside the projector and reducing possible overheating issues. Incomplete or infrequent filter-cleaning maintenance can cause one or more filters to accumulate excessive dust over time. This can inhibit proper airflow so that the projector begins to overheat during operation and eventually shut down. The next section provides information on the location of the filters on the projector, cleaning instructions and recommended maintenance schedules. Action: The following filters should be cleaned after every 100 hours of use. For dusty environments, filter cleaning should be performed more frequently. 1) Wire mesh filter (inside lamp housing shutter): Hold shutter open and use a computer vacuum to remove dust. Page 1 of 3 PSB.2005.06.001