Epson 935W Operation Guide - EasyMP Network Projection - Page 46
Network, Error Messages, Remedy, EasyMP Network Projection initialization failed.
View all Epson 935W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Troubleshooting 46 Error Messages The selected projector is busy. Do you want to continue the connection process? EasyMP Network Projection initialization failed. Connection failed due to keyword mismatch. Network adapter information could not be obtained. One or more connected projectors do not support resolutions greater than SXGA. Reduce the screen resolution and reconnect. One or more projectors are not responding. Remedy You tried to connect to a projector that is connected to another computer. When Yes is clicked, it connects to the projector. The connection between the projector and the other computer is cut off. When No is clicked, it does not connect to the projector. The connection between the projector and the other computer is maintained. Restart EasyMP Network Projection. If the message still appears, uninstall and then reinstall EasyMP Network Projection. s "Installing" p.7 When connecting to a projector for which a Projector Keyword has been set, the wrong Projector Keyword is entered. Check the Projector Keyword that is displayed on the LAN standby screen. s "Operating the Computer" p.11 Check the following point. • Is a network adapter installed on the computer? • Is the driver for the network adapter used installed on the computer? • Is the network adapter enabled? After checking, restart the computer and connect again. If you still cannot connect, check the following. Check the network settings on the computer and the network settings on the projector. You can make network settings from the projector's Network menu. See your projector User's Guide for details. There is an incompatible projector in the connection destination. Change the computer screen resolution to SXGA (1280x1024) or less. Failed to simultaneously connect to one or more of the projectors that you attempted to connect to. Check the network settings on the computer and the network settings on the projector. You can make network settings from the projector's Network menu. See your projector User's Guide for details.