Epson 9800 Printer Guide - Page 27
Unpacking and Assembling the Epson Stylus Pro 9800, Epson Stylus Pro 9800
UPC - 010343857735
View all Epson 9800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Setting Up the Printer | 27 Unpacking and Assembling the Epson Stylus Pro 9800 WARNING: Two people are required to unpack the printer, and four are needed to set it on the stand. Follow these steps to assemble your printer and its stand. If you have the Epson Stylus Pro 7800, see page 17 instead. Before you begin, make sure you have sufficient space to set up and use the printer. The following illustration shows the minimum space required for using the Epson Stylus Pro 9800: Note: When choosing a place for the printer, leave adequate room for easy access and ventilation. Avoid locations subject to direct sunlight, excessive heat, moisture, or dust. Also avoid locations near potential sources of interference, such as loud speakers, cordless phones, TVs, or air conditioners. 12 in. 12 in. 24 in. 12 in. You will also need floor space of approximately 13 × 13 feet to assemble the printer and stand. 1-27