Epson AP-60 Supplemental / Late Breaking Information - Page 2

Pendant Microphone Attach the Neck Strap 1. Disconnect both ends of the pendant microphone's neck strap. 2. Attach the ends of the neck strap to the pendant microphone. 3. Reconnect the ends of the neck strap. Insert Batteries 1. Open the pendant microphone's battery cover. 2. Insert the included AA batteries into the pendant microphone. 3. Close the pendant microphone's battery cover. Using the Microphone 1. Wear the microphone around your neck with the black emitter facing away from you. 2. Adjust the neck strap so that the top of the microphone is just below your collarbone. 3. Press the power button on the pendant microphone until it clicks into place. The power button turns green. 4. Verify that the Mic light on the AP-60 is lit. The light should match the Channel selector on the pendant microphone. 5. Adjust the microphone sensitivity by rotating the Gain control wheel on the pendant microphone, if necessary. Note: If your system has more than one microphone, make sure that each microphone is on a different channel. For complete instructions on using or maintaining the pendant microphone, see your AP-60 User's Guide. Specifications Pickups: Audio input: Batteries: Power Consumption: 2 One 3.5 mm stereo-mini jack Two AA alkaline manganese DC 3.0 V 260 mA Contacting Customer Support Internet Support Visit Epson's support website at epson.com/support and select your product for solutions to common problems. You can download product documentation, view FAQs, or e-mail Epson with your questions. Speak to a Support Representative Before you call Epson for support, please have the following information ready: ■ Product name (Epson ELPMC01) ■ Product serial number ■ Proof of purchase (such as a store receipt) and date of purchase Then call: ■ U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday through Friday. ■ Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Important Safety Instructions ■ Never pull the neck strap when it is hung around the neck. It may result in injury or accident. ■ Incorrect battery usage may cause leakage of battery fluid and battery rupture, which could result in fire, injury or corrosion of the system. When replacing batteries, take the following precautions: ■ Do not leave the microphone with batteries inside a vehicle with the windows closed, in places where they will be exposed to direct sunlight, or in other places that may become extremely hot. Thermal deformation or technical malfunction may occur, which could result in fire. ■ Insert batteries so that the polarities (+ and -) are correct. ■ Do not use batteries of different types or mix old and new batteries. ■ Do not use any batteries other than those specified in this guide. ■ If the batteries leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash them immediately. ■ Replace the batteries as soon as they run out. ■ Remove the batteries if you will not be using the system for a long period of time. ■ Do not expose batteries to heat or flame and do not put them in water. Consult your state and local regulations regarding proper disposal of batteries. ■ Keep these batteries out of the reach of children. Batteries are choking hazards and are very dangerous if swallowed. ■ To reduce the risk of fire, do not expose this apparatus to rain or moisture.