Epson ActionLaser 1600 Service Manual - Page 112
ABCDE, Table 5-38. Print Quality Anomaly
View all Epson ActionLaser 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Troubleshooting EPL-5600/ActionLaser 1600 Service Manual 5.4.2 Print Quality Anomaly This section describes how to isolate a print quality problem from the possible causes. Table 5-38. Print Quality Anomaly Symptom .OW image density. ABCDE ABCDE ABCDE ABCDE El Foggy background ABCDE ABCDE ABCDE ABCDE n Possible Cause Poor development Improper charging Image transfer problem Paper problem Defective optical unit Improper print density setting Poor development Improper charging Improper print density setting Defective optical unit Part Name Check item Imaging cartridge check the toner Ievei in the imaging cartridge. PWB-F board - Imaging cartridge - PWB-F board - Check to see if the Image transfer surface of image roller transfer roller is darnaged. PWB-F board - Paper Check to see if WPer is moist. Optical unit - - - Imaging cartridge Drum charge - - Check the wiring of developing bias line. - Chtik the wiring of PC drum charging bias line. - Optical unit - Remedy Shake the imaging cartridge. Replace the imaging cartridge. Replace the PWB-F board. Replace the imaging cartridge. Replace the PWB-F board. Replace the image transfer roller. Replace the PWB-F board. Replace paper. Replace the optical unit. Adjust the print density using SelecType. Replace the imaging cartridge. Replace the PWB-F board. Replace the PWB-F board. Replace the imaging cartridge. Adjust the print density in SelecType. Replace the optical unit. 5-12 Rev. A