Epson ActionLaser 1600 User Manual - Page 101
button once to set the printer on line
View all Epson ActionLaser 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Make sure that your interface cable meets the specifications for the printer and computer. If you are using a parallel interface, make sure the parallel interface cable is a 6-foot doubleshielded, twisted-paired cable. If you are using the serial interface, be sure you have selected the appropriate interface (RS-232C or RS-422) and that the settings on the SERIAL MENU match the settings of your computer. See your computer manual for the correct settings. Make sure that your software is properly set up for your printer. The imaging cartridge may be empty. Use the SelecType TONER setting as described in Chapter 4 to see how much toner is remaining. If toner is low (E F), replace the imaging cartridge as described in the Read This First guide. Printer doesn't print and the On Line light is off Press the On Line button once to set the printer on line (the On line light comes on). Font selected with software commands won't print If you are using a cartridge font, make sure you have installed the correct font cartridge. Also make sure that the orientation (portrait or landscape) matches the selected font. Some or all of the output is garbled or printed as asterisks Make sure that both ends of the interface cable are plugged in Securely. If you are using a parallel interface, make sure the parallel interface cable is a Hoot double-shielded, twisted-paired cable. Troubleshooting and hdaintenance 6-5