Epson ActionNote 890C Product Information Guide - Page 1

EPSON ActionNote 890 Series Front View l These parts function only with the optional audio card installed. Rear Panel and Left Side l Available only with the optional internal fax/modem or infrared device installed. Notebook Specifications CPU and Memory CPU 486 DX4/ 100 microprocessor installed in a PGA socket; includes 8KB of internal cache in write-back mode and integrated math coprocessor System speed Fast speed and slow speed (8 MHz) available; speed selection through Setup Memory ROM Video RAM Cache Clock/ calendar 8MB standard, configured with 4 or 8MB RAM soldered on the system board; systems with 4MB on system board, include an additional 4MB memory module; expandable up to 24MB using a 4, 8, or 16MB memory expansion module (can install a 20MB module on systems with 4MB on the system board) 128KB Flash ROM device containing the system and video BIOS and Setup program code 512KB DRAM supports resolutions up to 640 X 480 in 256 colors on the color LCD and up to 1024 X 768 in 16 colors or 800 X 600 in 256 colors on external monitor 8KB internal Real-time clock, calendar, and CMOS RAM; backed up by internal battery Controllers Video Diskette drive Hard disk PCMCIA Chips and Technology® 65535 video controller; 32-bit local bus interface to the microprocessor; supports enhanced video modes on an external monitor; supports resolutions from 640 x 480 in 256 colors on the color LCD and up to 1024 x 768 in 16 colors on an external monitor; automatic external monitor detection; simultaneous display with LCD screen using Fn F10 command or software Built-in super I/O controller for one internal 3.5-inch diskette drive; supports 720KB and 1.44MB formats Built-in super I/O controller has interface to one 2.5-inch, IDE internal hard disk drive; automatically recognizes and configures drives up to 19 mm high that support the IDE interface Built-in Vadem® VG-468 controller for two stacked slots; supports two Type I or II cards, or one Type III; PCMCIA version 2.01 and JEIDA 4.1 compatible; supports low power and suspend modes; supports hot insertion (including ExCA standards); register compatible with Intel® 82365SL, 8/25/95 AN890-1