Epson Apex 386SX/16 Canadian Product User Manual - Page 109
OC, manual, PPM-1630, LIM 4.0
View all Epson Apex 386SX/16 Canadian Product manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Note that If you have more than one megabyte memory, you may enable or disable the 384K memory as shadow RAM. The 384K is always allocated at the same address for shadow RAM, even if you disable the shadow RAM. Important: You can only enter the setup menu by pressing when the power is just switched on. You may reset the system to enter setup menu, too. Shadow RAM Enable For efficient execution of BIOS, it is preferable to run BIOS code through RAM rather than through the slower EPROMs. The PPM163OC can support shadow RAM for BIOS and video. To enable shadow RAM, follow the steps below: l Hold down the key to enter the DTK BIOS setup menu as you turn the power on. l Select item 6 to enter NEAT Chip Setup Configuration. l Select item 1 to enable BIOS or video shadow HAM. (Refer to the DTK BIOS manual for details.) EMS Driver Setup The PPM-1630 mainboard supports LIM 4.0 EMS. To set up the EMS driver, follow the steps below : Chapter 6: Appendix 11