Epson BrightLink 455Wi Operation Guide - EasyMP Network Projection - Page 6

Installing the Software 6 Installing the Software You can find EasyMP Network Projection on the EPSON Projector Software CD-ROM. Install the software on the computer you are using. Software Requirements EasyMP Network Projection runs on computers that meet the following requirements. OS Windows 2000 Service Pack 4 The following 32 bit OS versions: Windows XP Windows XP Service Pack 1 or later Windows Vista Windows Vista Service Pack 1 or later Windows 7 The following 64 bit OS versions: Windows 7 Mac OS X 10.3.x Mac OS X 10.4.x Mac OS X 10.5.1 or later* Mac OS X 10.6.x Recommended: Mac OS X 10.3.9/10.4.11/10.5.8 CPU Mobile Pentium III 1.2GHz or faster Power PC G3 900MHz or faster Recommended: Pentium M 1.6GHz or faster CoreDuo 1.83GHz or faster Amount of Memory 256MB or more Recommended: 512MB or more Hard Disk 20MB or more Free Space Display Resolution of no less than XGA (1024x768) and no higher than UXGA (1600x1200) Display color of 16-bit color or greater (approx. 32000 display colors) * Operation is not guaranteed in Mac OS X 10.5.0 because the Firewall settings are not set correctly when the version is updated. Installing Make sure you check the following points before starting installation. • When using a computer running any of the following operating systems, you must have administrator authority to install EasyMP Network Projection. • Windows 2000 • Windows Vista • Windows XP • Windows 7 • Make sure that you close all running applications before starting installation. • When the language selected for the installation varies from that of the OS being used, the screens may not be displayed correctly. • To download the latest version of EasyMP Network Projection, go to www.epson.com and select your location.