Epson BrightLink 475Wi Installation Worksheet - Page 3
© 2012 Epson America, Inc. 3/12
 |
View all Epson BrightLink 475Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
10 in. (254 mm) -height of wall plate plus cover Required distance from top of image area to wall plate (c) Distance from ceiling to top of image area (d) Ceiling height Height of image area (h) Diagonal image size (S) Width of image area (w) Distance from floor to bottom of image area (f) (8) After confirming your image size, use tape or a pencil to mark the distance (c) from the top of the image area on the board to the bottom of the wall plate. (9) Align the line (horizontal) on the template sheet with the (c) mark, then align the center line on the template sheet with the center of the image area. Follow the instructions in the Installation Guide to install the projector. © 2012 Epson America, Inc. 3/12 CPD-37080
-
1 -
2 -
3 -
4 -
5
 |
 |
© 2012 Epson America, Inc. 3/12
CPD-37080
(8)
After confirming your image size, use tape or a pencil to mark the distance (c)
from the top of the image area on the board to the bottom of the wall plate.
(9)
Align the
line (horizontal) on the template sheet with the (c) mark, then align
the center line on the template sheet with the center of the image area. Follow
the instructions in the
Installation Guide
to install the projector.
10 in. (254 mm) —height
of wall plate plus cover
Required distance from top
of image area to wall plate (c)
Diagonal image
size (S)
Ceiling
height
Distance from ceiling to
top of image area (d)
Width of image area (w)
Distance from floor to
bottom of image area (f)
Height of
image area (h)