Epson BrightLink 536Wi User Manual - Page 4
Calibrate, Using the Remote Control
View all Epson BrightLink 536Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
3 Calibrate If the pen position and cursor location don't match, you can try auto calibration, or you can calibrate manually for even greater accuracy. You don't need a computer, and you won't need to calibrate again unless the projector or image is moved, or the image is resized. 1 To start calibration, do one of the following: • Press the User button to start auto calibration, then wait until calibration is complete. • Follow the steps below to calibrate manually. 2 Press the Menu button on the remote control, select the Extended menu, and press . 3 Select the Easy Interactive Function setting and press . 4 Select Manual Calibration, then press . 5 When you see this screen, press to select Yes. Using the Remote Control Turn projector on/off Select from various image sources connected to the projector Access menu system for additional adjustments Calibrate Page through documents Temporarily turn off image and sound Switch between computer and interactive pen Enter Zoom in and out Stop video action 6 Touch the circles on the screen with the pen to perform manual calibration. For more detailed instructions, see the online BrightLink User's Guide. For more information on using the remote control: • See the online BrightLink User's Guide. • Go to the training section and watch a video or two at epson.com/brightlinkvideos (U.S.) or epson.ca/brightlinkvideos (Canada).