Epson BrightLink EB-770Fi Users Guide - Page 238

5. When you finish selecting settings, press the Menu button to exit the menus. Parent topic: Selecting Whiteboard Settings Selecting Settings for Saving Whiteboard Pages You can select the default settings for saving whiteboard pages from the projector. 1. Press the Menu button. 2. Select the Interactive menu and press Enter. 3. Select the Save menu and press Enter. 4. Select the following options as necessary: • USB Storage lets you save whiteboard page files to a USB thumbdrive. • PC via USB Cable lets you save whiteboard page files to a device connected to the projector with a USB cable. • Network Folder lets you save whiteboard page files to a network folder. • CIFS Server lets you set the CIFS server's IP address or fully qualified domain name (FQDN). You can enter up to 64 alphanumeric characters. Note: You cannot use the following characters or spaces. If you need to enter more characters, enter them using the Web Config utility. To use a FQDN, you must configure a DNS server. You cannot use the following IP addresses: 127.x.x.x, 192.9.2.x, or 224.0.0.0 to 255.255.255.255. • Shared Folder Path lets you enter the network folder name in this format: share_name\folder_name or share name. You can enter up to 64 alphanumeric characters. You cannot use the following characters or |. • User name lets you enter a user name with read/write privileges on the network folder. You can enter up to 64 alphanumeric characters. You can enter a domain name by adding it before the user name and separating them with a backslash in this format: domain\username. Do not use a colon (":") or spaces. • Password lets you enter a password for the user name you entered. You can enter up to 64 alphanumeric characters. After you enter the password and select OK, the password is hidden. Do not use a colon (":") or spaces. • Check Connection lets you test the network connection. 238