Epson BrightLink Pro 1450Ui Users Guide - Page 36
Setting Up the Projector, Projector Placement, Removing and Attaching the Cable Cover - installation guide
View all Epson BrightLink Pro 1450Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Removing and Attaching the Cable Cover Projector Connections Installing Batteries in the Remote Control Installing Batteries in the Pens Projector Placement Your ultra-short throw projector is designed to be installed on a wall (with a wall mount) or vertically on a table (with a table mount) to create an interactive tabletop workspace. You can also place the projector on a flat surface such as a desk or table to project in a portable setup. Note: Finger touch is available only if the projector is installed on a wall (with a wall mount) or vertically on a table (with a table mount). Keep these considerations in mind as you select a projector location: • Follow the instructions in the Installation Guide provided with your mounting hardware to install the projector using the included mounting equipment. • Leave plenty of space around and under the projector for ventilation, and do not place it on top of or next to anything that could block the vents. • Position the projector within reach of a grounded electrical outlet or extension cord. • If installing vertically on a table, the table projection mount (V12H516020) is required. • If installing on a wall, the wall mount (V12H777020) is required. • If the projector is not mounted, place it on a sturdy, level surface. • For finger touch, make sure the projection surface is flat, smooth, and unwarped with no more than 0.2 inch (5 mm) of unevenness in any direction. Projector Setup and Installation Options Projection Distance Parent topic: Setting Up the Projector 36