Epson C11CA50201 Network Installation Guide - Page 33
Printing Problems, For Macintosh, follow the instructions on to install an application
UPC - 010343871878
View all Epson C11CA50201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Software installation failed Make sure that the printer is connected to your network (see page 5 for wireless or page 23 for Ethernet). Then remove and reinsert the CD to reinstall the printer software. Cannot communicate on a wired LAN If you're switching from a wireless to a wired network connection, you need to disable the wireless adapter using the printer's control panel. Select F Setup on the printer's control panel, select Network Settings > Wireless LAN Setup > Advanced Setup > Disable Wireless LAN. Select Yes, then press OK. The printer does not appear in the Add Printer window (Mac OS X) Make sure the printer driver was installed correctly and that your computer's TCP/ IP settings are configured correctly. Cannot access a memory card over the network ■ Remove the memory card from the printer. Select F Setup on the printer's control panel, then select Network Settings > File Sharing Setup > Network > Read/Write. Press OK, then press OK again to update the setting. ■ For Macintosh, follow the instructions on page 29 to install an application that allows you to access the printer's memory card slots over the network. Printing Problems Cannot print over the network ■ For wireless connections, print a Network Status Sheet (see page 35). If the Link Status is Disconnected, make sure the wireless router or access point is turned on and the settings are correct for your wireless network. ■ For wired connections, print a Network Status Sheet (see page 35) and make sure the settings are correct for your network. If the Network Status is Disconnected, try the following: ■ Make sure the Ethernet cable is securely connected to both the printer and your router, access point, switch, or hub. ■ Try connecting to another port on your router, access point, switch, or hub. Troubleshooting 33