Epson C11CA79201 User Manual - Page 27
Wireless Network Setup
View all Epson C11CA79201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Wireless Network Setup This section supplements the on-screen instructions for setting up your WorkForce 323/325 Series on a wireless network. WorkForce 320 Series owners may skip this section, as the WorkForce 320 has no built-in wireless network functionality. Before you begin, make sure you set up your product as described on the Start Here sheet. Follow the instructions in this chapter only if you need additional help. You will need to install the software on every computer that will print to your product. Temporary use of a USB cable (not included) is recommended for the first installation only. After the printer is connected to the network, you will be prompted to remove the USB cable. If you are using Mac OS X 10.6 or don't have a USB cable, you need to use the buttons on the printer to select wireless settings. Note: If you have trouble setting up your product, see "Network Problems (WorkForce 323/ 325 Series)" on page 42. ■ If this is the first time that you're installing the product, see "Installing for the First Time" on page 28. ■ If your product is already on your wireless network and you need to set up additional computers to print to the product, see "Setting Up Additional Computers" on page 37. Wireless Network Setup 27