Epson C11CA80201 Quick Guide - Page 45
Print a Network Status Sheet, Epson Scan is not available in Mac OS X 10.6
View all Epson C11CA80201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
The printer does not appear in the Add Printer window (Mac OS X) Make sure the printer driver was installed correctly and that your computer's TCP/IP settings are configured correctly. Cannot print over the network ■ Make sure that the printer is turned on and the green WiFi light on the front of the printer is on. ■ When using TCP/IP, make sure the printer's IP address is set correctly for your network. If your network does not assign IP addresses using DHCP, you need to set the IP address manually. Printing is slow or the print is cut off Print a Network Status Sheet (see below) and check the signal strength. If it's poor, try moving the printer closer to your wireless router or access point. Avoid placing the printer next to a microwave oven, 2.4 GHz cordless phone, or large metal objects such as a filing cabinet. Cannot find the scanner or start Epson Scan ■ Epson Scan is not available in Mac OS X 10.6, see "Scanning with Mac OS X 10.6" on page 34 for scanning instructions. ■ If network communication was interrupted while starting Epson Scan, exit Epson Scan, and restart it after a few seconds. If Epson Scan cannot restart, turn the printer off and back on, and then try restarting Epson Scan. Check the Timeout Setting in EPSON Scan Settings. For details, see the Epson Scan Help. ■ If you are scanning a large document at high resolution, a communication error may occur. If the scan did not complete, lower the resolution. Print a Network Status Sheet 1. Press the F Setup button on the printer's control panel to enter the Setup menu. 2. Select Network Settings, then press x Start. 3. Select Print Network Status, then press x Start. 4. Press the x Start button to print a network status sheet. Problems and Solutions 45