Epson C238001 User Manual - Page 71
Close the sprocket covers., Slide the right sprocket to remove any slack in the paper; then
View all Epson C238001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
6. Remove the front cover by pushing it straight down, as shown below. f 1 2 7. Make sure your paper has a clean, straight edge. Then open both sprocket covers and fit the first four holes of the paper, printable side up, over the tractor pins. f 8. Close the sprocket covers. 9. Slide the right sprocket to remove any slack in the paper; then lock it in place by pushing the sprocket lock down. 3-10 Printing on Continuous Paper
6.
Remove the front cover by pushing it straight down, as
shown below.
7.
Make sure your paper has a clean, straight edge. Then open
both sprocket covers and fit the first four holes of the paper,
printable side up, over the tractor pins.
8.
Close the sprocket covers.
9.
Slide the right sprocket to remove any slack in the paper; then
lock it in place by pushing the sprocket lock down.
1
2
f
f
3-10
Printing on Continuous Paper