Epson C31C564011 User Manual - Page 6

2. Input the IP address of the TM-P60 in the browser address bar and press Enter (Example: http:// 192.168.192.168 [default]). 3. The browser displays a dialog box requesting a user name and password. Click OK without entering any user name or password. (If you have changed the user name and password, you need to input them.) 4. You can modify the parameters by following the menus. You must click Submit to send the change to the printer and then click Reset to make the submission effective on each Web page. If you change the IP address, SSID, etc., you have to change the setting of the host PC and AP to match the printer's setting. ❏ Using the TMNetWinConfig (version 2.0) and the TM-P60 Technical Reference Guide For details, go to the following web site: http://pos.epson.com/ Specifications Print method Thermal line printing Print density 203 dpi × 203 dpi [dpi: dots per 25.4 mm (dots per inch)] Printing width (default) 52.5 mm, 420 dot positions Print font Font Font A: 12 × 24, Font B (default): 10 × 24, Font C: 8 × 16 Characters per line Font A: 35, Font B: 42, Font C: 52 Character size (W × H) Font A: 1.50 × 3.0, Font B: 1.25 × 3.0, Font C: 1.0 × 2.0 Character set 95 Alphanumeric, 48 International, 128 × 10 Graphic Paper Roll paper 57.5 ± 0.5 mm dimensions (default) (59.5 ± 0.5 mm by removing the spacer installed) Paper thickness 50 µm ~ 80 µm Paper roll spool diameter 18 mm outside Specified thermal paper Original: Kanzaki Specialty Paper (USA): P350 (paper thickness: 62 µm), P310 (paper thickness: 58 µm), P300 (paper thickness: 56 µm) Print speed Maximum 70 mm/s, when number of dots per dot line is 64 dots or less (printing with a fully charged battery, at 25°C, print density 100%) Interface RS-232C, IEEE802.11b Receive buffer 128 bytes Power Specified battery consumption Lithium-ion battery: Product name: LIP-2500, Trade name: Seiko Epson Corporation Output: DC 7.4 V Capacity: 2200 mAh AC adapter (option) Output voltage: DC 12 V Input voltage: AC 100 V ~ 240 V Product name: PS-10, Trade name: Seiko Epson Corporation Life Mechanism 10,000,000 lines printing Print head 100,000,000 dots Autocutter 500,000 cuts Temperature/ Operation humidity (Printing quality guaranteed) 5 ~ 45°C, 10 ~ 90% RH Storage Abnormal operations not found when the printer is left under the environment of 25°C, 60%RH for 2 hours after it was left in the following conditions: High temperature and humidity: 50°C, 90% RH for 120 hours High temperature: 70°C for 120 hours Low temperature: -25°C for 120 hours Overall dimensions (mm) 103 × 159 × 65 (W × D × H) Mass (with the battery, without roll paper) Approx. 670 g Note: For the battery specifications, see its instructions. 6