Epson C82N Start Here Card - Page 2

6 Install Software Follow the steps in the appropriate section below to install the printer software on Windows® XP, 2000, and NT 4.x, or on Macintosh®. To install on Windows Me, 98, or 95, see the Supplement booklet. NOTE: These procedures set up the printer for TCP/IP printing on Windows, and for AppleTalk printing on Macintosh. For other network protocols, such as NetWare or NetBEUI, see the Administrator's Manual. NOTE: All computers that use the printer with TCP/IP must be in the same IP subnetwork. Windows XP, 2000, NT 4.x 1 Make sure the computer is properly connected to the network, and then turn it on. Make sure the printer and print server are still on. 2 Put the EPSON Printer Software CD-ROM in the drive. The EPSON Installation Program window appears. 3 Double-click Install EpsonNet InstallWizard. Follow the on-screen instructions to install the InstallWizard on the computer. An EpsonNet InstallWizard icon appears on the desktop. 4 Double-click the EpsonNet InstallWizard icon. InstallWizard searches the network, finds your printer, and displays it in a dialog box. This can take 20 to 30 seconds. NOTE: InstallWizard may find more than one printer. Identify the printer by the name listed on the status report you printed out in section 5, "Connect the Print Server." 5 Select the check box next to your printer and click Next. InstallWizard automatically installs the printer driver and configures the printer port. This takes about 10 seconds. 6 Make sure there is letter-size plain paper in the printer, and then click the Print button to print a test page. If the test page prints, the installation is successful. 7 Optionally, install Status Monitor, which is a utility to monitor and control the printer. To do this, double-click Install EPSON Status Monitor, and follow the instructions on the screen. NOTE: Status Monitor creates some network traffic, so you may want to limit the number of users who have Status Monitor installed on their workstation. You can also turn it on and off. See the Supplement booklet for more information. 8 Optionally, do any of the following: • Install the printer movies and Reference Guide. To do this, double-click Install Printer Movies and Reference Guide (you may have to scroll down to see this option). Then double-click the EPIC icon on the desktop to view the printer movies or the Reference Guide. • Install EPSON SoftwareTM Film FactoryT,M a photo management program. To do this, double-click Install EPSON Software Film Factory (you may have to scroll down to see this option), and then follow the on-screen instructions. • View the print server Administrator's Manual. To do this, double-click View Administrator's Manual (you may have to scroll down to see this option). If you don't have Adobe® Acrobat® ReaderT,M install it when prompted. 9 Click the icon to close the EPSON Installation Program window, and then remove the CD-ROM from the drive. Continue Macintosh OS 8.6 to 9.x 1 Make sure the Macintosh is properly connected to the network, and then turn it on. Make sure the printer and print server are still on. 2 Put the EPSON Printer Software CD-ROM in the drive. 3 Double-click the EPSON icon in the CD-ROM window. The EPSON Installation Program window appears. 4 Double-click Install EPSON Stylus C82N Printer Driver. 5 Follow the on-screen instructions to install the driver, and then restart the Macintosh. 6 After the computer restarts, open the Chooser. 7 Select the C82 Series icon, set Background Printing to On, and then close the Chooser. 8 Optionally, double-click the EPSON icon in the CD-ROM window to open the EPSON Installation Program window, and then do any of the following: • Install the printer movies and Reference Guide. To do this, double-click Install Printer Movies and Reference Guide. Then, double-click the EPIC icon on the desktop to view the printer movies or the Reference Guide. • Install the EPSON Software Film Factory, a photo management program. To do this, double-click Install EPSON Software Film Factory (you may have to scroll down to see this option), and then follow the on-screen instructions. • View the print server Administrator's Manual. To do this, double-click View Administrator's Manual. If you don't have Adobe Acrobat Reader, install it when prompted. 9 Click the icon to close the EPSON Installation Program window, and then remove the CD-ROM from the drive. Macintosh OS X 1 Make sure the Macintosh is properly connected to the network, and then turn it on. Make sure the printer and print server are still on. 2 Put the EPSON Printer Software CD-ROM in the drive. Double-click the EPSON icon on the desktop to open the CD-ROM window. 3 Double-click the C82Series icon in the CD-ROM window. If you set up an administrator password when you installed OS X, you see this screen: Click the lock icon, type your administrator name and password, and then click OK. 4 Follow the on-screen instructions to install the driver, and then restart the Macintosh. 5 Open the Applications folder on your OS X drive, open the Utilities folder, and then double-click the Print Center icon. 6 If there are no printers in Print Center, the following dialog box appears. Click Add. If the Printer List window appears, click Add Printer. Continue Macintosh OS X continued 7 Select EPSON AppleTalk in the list at the top of the dialog box, click your printer in the list that appears, and then click Add. Your printer appears in the Printer List window. 8 Close Print Center. NOTE: Make sure you select the Stylus C82 in the Print Setup dialog box in the applications you use. 9 Optionally, do any of the following: • Install the printer movies and Reference Guide. To do this, double-click Printer Information Center in the CD-ROM window and follow the on-screen instructions. Then, double-click the EPSON Printer Information icon on the desktop to view the printer movies or the Reference Guide. • Install EPSON Software Film Factory, a photo management program. To do this, double-click Film Factory Installer in the CD-ROM window and follow the on-screen instructions. • View the print server Administrator's Manual. To do this, double-click Administrator's Manual.pdf in the CD-ROM window. 10 Remove the CD-ROM from the drive. 7 Questions? Here's where to look for answers: Printer Basics book Learn about loading paper, printing, maintaining the printer, solving problems, and contacting EPSON. Supplement booklet Tells you how to install printer software on Windows Me, 98, and 95, and provides general information about the network software utilities. The Supplement also includes instructions for turning Status Monitor off and on. Printer movies and Reference Guide Learn more about using the printer. Double-click the EPIC icon (Windows, Mac OS 8.6 to 9.x) or the EPSON Printer Information icon (Mac OS X) on the desktop, and then click either Print Show or Reference Guide. If you have not installed these, see section 6, "Install Software," for instructions. EpsonNet External Print Server Administrator's Manual Provides information about using the print server, network utilities, and other operating systems and network protocols (NetWare, NetBEUI, OS/2, UNIX, and others). Double-click View Administrator's Manual in the EPSON Installation Program window (Windows, Mac OS 8.6 to 9.x) or double-click Administrator's Manual.pdf in the printer software CD-ROM window (Mac OS X). EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION. EPSON Software is a trademark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks. Copyright © 2002 by Epson America, Inc. Printed on recycled paper. Printed in USA. 10/02