Epson CX7400 Product Information Guide - Page 9

If no other cartridges are low or expended, the print head moves to the replacement position on the right. Go to step 5. Epson Stylus CX7400 Series 7. Before you open the new ink cartridge package, shake it four or five times. Then remove it from the package. Caution: Do not move the print head by hand; this may damage the CX7400 Series. Always press and release the y Stop button to move it. 4. Press the y Stop button again. If another cartridge is low or expended, it moves to the _ position. Press the y Stop button again to see if more cartridges are low or expended. If no other cartridges are low or expended, the print head moves to the replacement position on the right. 5. Open the cartridge cover. Caution: Do not touch the green chip on the front of the cartridge. This can damage the ink cartridge. 8. Remove the yellow tape from the bottom of the ink cartridge. Caution: Do not remove any other labels or seals, or ink will leak. 9. Insert the new ink cartridge into the cartridge holder and push it down until it clicks into place. 6. Squeeze the tab on the cartridge and lift the cartridge straight up to remove it. Dispose of it carefully. Do not take the used cartridge apart or try to refill it. 10. Once you replace all the necessary cartridges, close the cartridge cover and press it down until it clicks into place. Warning: If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. Keep ink cartridges out of the reach of children. 11. Close the scanner. 7/07 9