Epson ColorWorks CW-C6000A Users Manual - Page 70

A Message is Displayed on the Operation Panel

Get Epson ColorWorks CW-C6000A PDF manuals and user guides View all Epson ColorWorks CW-C6000A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

Troubleshooting A Message is Displayed on the Operation Panel Message Information Paper feed error. Load the paper or change the media source setting. Information Cannot detect the roll paper. Reload the paper or change the media detection setting. Information Cannot detect the fanfold paper. Reload the paper or change the media detection setting. (On the home screen) Load paper. Information The size of the loaded paper is incorrect. Replace the paper. Information The roll paper is not loaded. Information The fanfold paper is not loaded. Information Paper jam. Information The paper is not loaded correctly. Reload the paper. Information Calibration failed. Press the OK button. Then reload or replace the paper. Solution and Reference Use paper that matches the [Media Source] and [Media Form] settings. Or change the [Media Source] and [Media Form] settings to match them with the loaded paper. (U"Printer Driver Settings" on page 34) Use paper that matches the [Media Detect] settings. Or change the [Media Detect] settings to match them with the loaded paper. (U"Printer Driver Settings" on page 34) Use paper that matches the [Media Detect] settings. Or change the [Media Detect] settings to match them with the loaded paper. (U"Printer Driver Settings" on page 34) Load paper. (U"Loading and Replacing Paper" on page 39) Load media that matches the print area size. Or change the print area to match it with the media size. (U"Loading and Replacing Paper" on page 39) Load roll paper. (U"Loading and Replacing Paper" on page 39) Load fanfold paper. (U"Loading and Replacing Paper" on page 39) Remove the jammed paper and then load paper. (U"Paper is jammed" on page 62) Remove the paper, and then load the paper again. See "How to Eject Paper at Paper End (For the Auto Cutter Model)" on page 50 or "How to Eject Paper at Paper End (For the Peeler Model)" on page 51, and "Loading and Replacing Paper" on page 39. Make sure that the paper loaded in the printer matches the paper detection method (gap or black mark), and reset the paper. (U"Loading and Replacing Paper" on page 39) If the error still occurs, the detector cannot handle the paper. Replace the paper. 70

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Troubleshooting
70
A Message is Displayed on the Operation Panel
Message
Solution and Reference
Information
Paper feed error.
Load the paper or change
the media source setting.
Use paper that matches the [Media Source] and [Media Form] settings. Or
change the [Media Source] and [Media Form] settings to match them with
the loaded paper.
(
U
"Printer Driver Settings" on page 34
)
Information
Cannot detect the roll paper.
Reload the paper or change
the media detection setting.
Use paper that matches the [Media Detect] settings. Or change the [Media
Detect] settings to match them with the loaded paper.
(
U
"Printer Driver Settings" on page 34
)
Information
Cannot detect the fanfold paper.
Reload the paper or change
the media detection setting.
Use paper that matches the [Media Detect] settings. Or change the [Media
Detect] settings to match them with the loaded paper.
(
U
"Printer Driver Settings" on page 34
)
(On the home screen)
Load paper.
Load paper.
(
U
"Loading and Replacing Paper" on page 39
)
Information
The size of the loaded paper is
incorrect.
Replace the paper.
Load media that matches the print area size. Or change the print area to
match it with the media size.
(
U
"Loading and Replacing Paper" on page 39
)
Information
The roll paper is not loaded.
Load roll paper.
(
U
"Loading and Replacing Paper" on page 39
)
Information
The fanfold paper is not loaded.
Load fanfold paper.
(
U
"Loading and Replacing Paper" on page 39
)
Information
Paper jam.
Remove the jammed paper and then load paper.
(
U
"Paper is jammed" on page 62
)
Information
The paper is not loaded correctly.
Reload the paper.
Remove the paper, and then load the paper again.
See
"How to Eject Paper at Paper End (For the Auto Cutter Model)" on page
50
or
"How to Eject Paper at Paper End (For the Peeler Model)" on page 51
,
and
"Loading and Replacing Paper" on page 39
.
Information
Calibration failed.
Press the OK button. Then reload
or replace the paper.
Make sure that the paper loaded in the printer matches the paper detection
method (gap or black mark), and reset the paper. (
U
"Loading and
Replacing Paper" on page 39
)
If the error still occurs, the detector cannot handle the paper. Replace
the paper.