Epson ELP-7300 Product Information Guide - Page 3
Projector Status Lights
UPC - 010343820203
View all Epson ELP-7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
EPSON PowerLite 5300/7200/7300 Projector To determine the projection distance when you know the diagonal size of the screen image: t Inches: Maximum projection distance = (2.1949 × diagonal size) − 2.5044 Minimum projection distance = (1.6328 × diagonal size) − 2.4923 t Centimeters: Maximum projection distance = (2.1949 × diagonal size) − 6.3612 Minimum projection distance = (1.6328 × diagonal size) − 6.3304 For example, here are the measurements for three installations: Image size (diagonal) Horizontal distance from projector to screen Minimum Maximum 300 inches* (762 cm) 487.3 inches (12.4 m) 656.0 inches (16.7 m) 200 inches (508 cm) 324.1 inches (8.2 m) 436.5 inches (11.1 m) 100 inches (254 cm) 160.8 inches (4.1 m) 217.1 inches (5.5 m) * For an image size of 300 inches, the projector may be up to 54 feet away from the screen, depending on the setting of the zoom ring. Long Throw Zoom Lens Calculations If you are using the optional long throw zoom lens, use the following formulas instead: To determine the minimum and maximum diagonal size of an image when you know the projection distance: t Inches: Maximum diagonal size = (0.4742 × projection distance) + 3.2489 Minimum diagonal size = (0.2849 × projection distance) + 1.8968 t Centimeters: Maximum diagonal size = (1.2045 × projection distance) + 8.2521 Minimum diagonal size = (0.7236 × projection distance) + 4.8179 To determine the projection distance when you know the diagonal size of the screen image: t Inches: Maximum projection distance = (3.5094 × diagonal size) − 6.6568 Minimum projection distance = (2.1090 × diagonal size) − 6.8519 t Centimeters: Maximum projection distance = (8.9139 × diagonal size) − 16.9083 Minimum projection distance = (5.3569 × diagonal size) − 17.4038 Projector Status Lights The status lights on top of the projector tell you the projector's operating status. power light temperature light projection lamp light Caution: A red light warns you if a serious problem occurs. Power Light Light status Steady orange Steady green Flashing green Flashing orange Off Meaning Sleep mode. (The projector is plugged in, but not projecting.) Power and lamp are on. The projector is warming up. Allow about 30 seconds. The projector is cooling down. The power cord is not plugged in or there is an internal projector problem. Projection Lamp Light Light status Orange and red flashing alternately Steady red Flashing red Off Meaning Lamp timer has exceeded 1900 hours. Projection lamp needs replacing. Projection lamp has burned out. Replace lamp. Problem with projection lamp or lamp power supply. Lamp is functioning normally. Temperature Light Light status Flashing orange Steady red Flashing red Off Meaning Projector is too hot. Projector has turned off automatically because of overheating. Problem with the cooling fan or temperature sensor, generating an overheat condition. The projector is functioning normally. 1/99 EPSON PowerLite 5300/7200/7300 Projector - 3