Epson ELPDC03 Motion Presentation Camera User Manual - Page 30
Solving Problems with the Image
View all Epson ELPDC03 Motion Presentation Camera manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Solving Problems with the Image No image appears on the screen. I Check that all cables are properly connected (see Chapter 1) and everything is turned on. I Make sure the projector is not in sleep mode. Check the projector documentation. I The document camera may have been turned on too quickly after it was turned off. Turn the document camera off, wait a few seconds, and then turn it on again. The image contains static or noise. I If you're using cables that are longer than 6 feet (2 m), or an extension cable, the image quality may be reduced. I Keep your projector and video cables away from the power cord as much as possible to prevent interference. I The frequency switch may be set incorrectly. Change the frequency as described on page 10. The image is blurry. I There may be dirt on the lenses. Clean the lenses as described on page 22. I The Auto Focus feature may be turned off. If the Auto Focus indicator light is not lit, press the Auto Focus button. I Some objects do not auto focus well. Manually focus these objects by first turning off Auto Focus and then using the Near and Far buttons. 26 Solving Problems