Epson ELPDC20 Quick Start - Page 1

EPSON® DC-20 Document Camera (ELPDC20) Quick Start Follow these instructions to display pages from books and documents, and three-dimensional objects. To use other features, see the User's Guide on the product's CD-ROM. It provides instructions for using the microscope adapter, capturing still images, and using the included software. Before using the product, make sure you read the safety instructions in the User's Guide on the product's CD-ROM. Setting up the product 1 Raise the camera arm. 4 Press the power button to turn on the document camera. 5 Turn on your projector. Then select the source (port) on the projector that lets you display the camera image. On the document camera, press the Source button, if necessary. Using the product 1 Place your document on the table under the camera head. Align the center of your document with the mark on the side of the document camera. 2 Connect your projector. Use a VGA cable (included), a composite video cable (check your projector for available ports), or an HDMI cable (not included). 2 Slide the lamp switch to illuminate the document. Lamp switch VGA cable Composite video cable 3 Press the Focus button on the document camera or the Auto Focus button on the remote control. Your document is automatically focused. 4 To zoom in or out on part of the image, press the Zoom or button. Note: You can also use the remote control to adjust the image. When you're done using the product, turn it off and lower the camera arm as shown. HDMI cable 3 Connect the power adapter. *412373100* *412373100*