Epson ELPDC30 Quick Setup and Warranty - Page 1

Epson® DC-30 Document Camera (ELPDC30) Quick Start IMPORTANT: Before using the product, make sure you read these instructions and the safety instructions in the online User's Guide. Follow these instructions to display pages from books and documents, and three-dimensional objects. For instructions on using the microscope adapter and other features, see the online User's Guide. Setting up the product 1 Raise the camera arm with one hand while holding the base with your other hand. Using the product 1 Place your document on the table under the camera head. Adjust the camera head and arm if needed. 2 Press the Lamp button to illuminate the document. 2 Position the camera head above the projection area. 3 Connect the document camera directly to your projector using the included HDMI cable. Or, use the included USB cable to control your document camera from a computer using the camera software (see "Using the software"). 3 Press the AF button on the document camera or remote control. Your document is automatically focused. 4 To zoom in or out on part of the image, press the Zoom or button on the document camera or remote control. Note: For more information on using the remote control, see the online User's Guide. 5 If a computer is connected to the document camera, you can use the DC/PC button on the document camera or remote control to switch between the computer image and the image from the document camera. Note: You can also connect to your projector wirelessly using Miracast® (see the online User's Guide for details). 4 Connect the power adapter and plug it into an electrical outlet. When you're done using the product, turn it off and lower the camera arm as shown. 5 Press the power button to turn on the document camera. 6 Turn on your projector. Then select the source (port) on the projector that lets you display the camera image. On the document camera, press the DC/PC button, if necessary. Using the software You can use the Easy Interactive Tools software to capture live audio and video, as well as still images. You can also use it to make time-lapse movies, annotate captured images, and upload your videos to popular websites. The Epson Connect Tool for Document Camera software lets you use Miracast to send images from the document camera to your projector. See the online User's Guide for details. Installing the software Note: An Internet connection is required to obtain the product software. 1 Download and run your product's software package: http://epson.com/support/dc30downloads (U.S.) http://epson.ca/support/dc30downloads (Canada) 2 Follow the instructions on the screen to run the setup program.