Epson EMP TW600 User Guide
Epson EMP TW600 - LCD Projector - HD 720p Manual
 |
View all Epson EMP TW600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson EMP TW600 manual content summary:
- Epson EMP TW600 | User Guide - Page 1
- Epson EMP TW600 | User Guide - Page 2
, and also includes safety instructions, world-wide warranty terms booklet and a troubleshooting check sheet. Be sure to read this manual thoroughly before using the projector. User's Guide (this manual) This User's Guide contains information on installing the projector, basic operations, using the - Epson EMP TW600 | User Guide - Page 3
(3.0m) Connect to the projector and to a wall outlet. Documentation ❏ AA alkali batteries (2 pcs.) Insert into the remote control. ❏ Safety Instructions/World-Wide ❏ D4 SCART adapter Warranty Terms Use a commercially-available SCART cable to ❏ User's Guide make the connections when projecting - Epson EMP TW600 | User Guide - Page 4
Table of Contents ■ Features of the Projector 4 ■ Part Names and Functions 6 Front / Top 6 Control panel 6 Remote control 7 Rear 8 Base 8 ■ Appearance 9 Installing the Projector ■ Setting up 10 Adjusting the projection size 10 ■ Connecting Image Sources 12 ■ Preparing the Remote - Epson EMP TW600 | User Guide - Page 5
41 • Problems with the remote control 41 Appendix ■ Maintenance 42 Cleaning 42 • Cleaning the air filter 42 • Cleaning the projector case 42 • Cleaning the lens 42 Consumable replacement periods 43 • Air filter replacement period 43 • Lamp replacement period 43 Replacing consumables 44 - Epson EMP TW600 | User Guide - Page 6
Features of the Projector Image appearance can be selected to match the projection environment Black 1", "Theatre Black 2" or "sRGB " is selected, the Epson Cinema Filter effect is applied automatically to increase the contrast and to make skin tones appear with more natural tints. p.18 Dynamic - Epson EMP TW600 | User Guide - Page 7
projector to be set up with greater freedom, even if it is suspended from a ceiling or at an angle to the screen. p.16 Features of the Projector entire image, but also to emphasize specific regions, such as hair and clothing that are available are as follows. EPSON Super White is used to prevent - Epson EMP TW600 | User Guide - Page 8
Part Names and Functions Front / Top • Control panel • Horizontal lens in different colours to indicate the operating status of the projector. • (Warning) indicator p.35 Flashes or lights in different colours to indicate problems with the projector. • Aspect button p.18 • Select/Line menu - Epson EMP TW600 | User Guide - Page 9
Part Names the absolute colour temperature. • Pattern button p.17 Selects a test pattern. • (Illumination) button All buttons on the remote projector's selected port. You can select the input signal to match the equipment that is connected to the selected port. • Contrast button p.28 Adjusts contrast - Epson EMP TW600 | User Guide - Page 10
. When the projector's power is turned off or a problem with operation occurs, the output becomes 0 V to send the projector's power ON/ ceiling mount here when suspending the projector from a ceiling. • Lamp cover p.44 • Air filter (air intake vent) p.42, 44 Open this cover when replacing the lamp - Epson EMP TW600 | User Guide - Page 11
*2 406 *1 Distance from centre of lens to suspension bracket fixing point (Lens shift amount: Max. 8.6 mm vertically) *2 Distance from centre of lens to centre of projector (Lens shift amount: Max. 7.7 mm horizontally) Centre of lens 300 52.8 76.3 160 4-M4×8 Units:mm 9 - Epson EMP TW600 | User Guide - Page 12
Instructions/World-Wide Warranty Terms booklet before installing the projector. Do not stand this projector upright. This may damage your projector as a guide for setting up the projector. Units: projector in the following locations. p.16 Hanging from the ceiling A screen in a high location Projector - Epson EMP TW600 | User Guide - Page 13
environment. When installing against a wall, leave a space of 20 cm (7.9 in.) or more between the projector and the wall. A special method of installation is required in order to suspend the projector from the ceiling. Please contact your dealer if you would like to use this installation method. 11 - Epson EMP TW600 | User Guide - Page 14
that are supplied with the signal source to make the connections. TIP • The cable that should be used to connect video equipment to the projector will depend on the type of video signal that the equipment outputs. Some kinds of video equipment output several different types of video signal. The - Epson EMP TW600 | User Guide - Page 15
tab. Press down until the battery cover clicks into place. Installing the Projector Insert the batteries. Check the (+) and (-) indications inside the battery . If this happens, replace the batteries with two new batteries. Use two TIP new AA batteries as replacement batteries. Using the remote - Epson EMP TW600 | User Guide - Page 16
ON Turning the power on and projecting images If there is a problem with projection even though the projector is set up and connected correctly, refer to p.15, 35. If a laptop computer or a computer with a LCD screen has been connected to the projector, you may need to use keyboard or function - Epson EMP TW600 | User Guide - Page 17
images are not projected If more than one signal source has been connected, or if no images are projected, use the remote control or the projector's control panel buttons to select the signal source. For video devices, press the [Play] button on the video equipment first, then select the signal - Epson EMP TW600 | User Guide - Page 18
image is shifted vertically by the full amount, it cannot be shifted horizontally by more than 11% of its width. When transporting the projector, make sure to turn the lens position down by the full amount. Otherwise the lens shift function may be damaged. Standard projection position (centre - Epson EMP TW600 | User Guide - Page 19
control is pressed, the pattern menu appears. Display Position This can be used to check that the projector is not tilted but rather set up parallel to the screen. Clears the test pattern display Gray Scale This is used when adjusting brightness or when adjusting image quality or colour tone - Epson EMP TW600 | User Guide - Page 20
from the menu. Setting is also possible using the configuration menu. SeSleeclteinctgintghethaespaescptect Press or on the remote control or on on the projector's control panel to select an item. Press or to confirm the selection. * If you press , the menu disappears. Press menu. and select - Epson EMP TW600 | User Guide - Page 21
source has an sRGB mode, set both the projector and the connected signal source to sRGB. (Ideal for viewing computer images.) When you select the colour mode indicated with , the Epson Cinema Filter will be applied automatically to increase the contrast and makes skin tones more natural. Input - Epson EMP TW600 | User Guide - Page 22
adjustmeAnbtsolute colour Press on the remote control or on the projector's control panel to make the adjustment. temperature adjustment * , and you may want to adjust this. Lower values will increase the contrast of the dark (Projection will stop temporarily during such portions but will tend - Epson EMP TW600 | User Guide - Page 23
Advanced Colour Adjustments Image Quality Adjustments This can be used to adjust the skin tones for images of people. The Epson Cinema Filter effect that is automatically applied to images when a "Color Mode" setting is made creates natural-looking skin tones. If you would like to - Epson EMP TW600 | User Guide - Page 24
the - (left) side, the whole image will become sharper, but the contrast in dark areas will become poorer. Use or to select a menu item, to the + (right) side, bright areas will become whiter, but the contrast will become poorer. Hue and saturation adjustment Press and then select "Picture" - - Epson EMP TW600 | User Guide - Page 25
, adjustments to advanced sharpness and the amount of light from the lamp can also be made to match the image in search of the select a menu item, and use or to make adjustments. Adjust the resolution and contrast of the image. If "High-band Enhancement" is set in the + direction, hair - Epson EMP TW600 | User Guide - Page 26
Color Mode Input Adjustment Color Saturation White Level/Black Level Brightness/Contrast Tint Sharpness Standard Advanced Color Adjustment Auto Iris Abs. Color on the projector's control panel to select an item. Press or to confirm the Sync. Position Advanced Auto Setup EPSON Super White - Epson EMP TW600 | User Guide - Page 27
been applied to images will be retained even when the TIP projector's power is turned off. The same memory adjustment settings will be applied to images that are projected the next time the projector's power is turned on. The aspect setting retrieved from memory may not - Epson EMP TW600 | User Guide - Page 28
Theatre Black 1, Theatre Black 2, sRGB "Picture" menu Input Adjustment Color Saturation p.28 * p.28 * White Level/Black Level Brightness/Contrast Tint p.28 * Sharpness p.28 * Standard Advanced High-band Enhancement, Low-band Enhancement, H-Sharpness, V-Sharpness 26 Color Adjustment Auto - Epson EMP TW600 | User Guide - Page 29
Yes, No EPSON Super White On Off Child Lock On, Off User's Logo p.32 Yes, No Ceiling, Rear, Rear/Ceiling Language Reset p.33 p.33 Yes, No Lamp Hours The message text will be displayed in yellow when it is time to replace the lamp projector status. 27 Configuration Menu "Info" menu - Epson EMP TW600 | User Guide - Page 30
is changed to the + side, dark areas become clearer. Brightness/Contrast Adjusts the overall brightness of the images. • Brightness: The brightness to the entire image. Advanced This can be used to adjust a specific region. p.23 Color Adjustment "Color Adjustment" cannot be selected when the - Epson EMP TW600 | User Guide - Page 31
images if flickering, fuzziness or interference appear in the images. • Flickering and fuzziness may also appear in images when the brightness, contrast , sharpness and keystone correction settings are adjusted. • Clearer adjustments can be obtained if you adjust the "Tracking" first and then adjust - Epson EMP TW600 | User Guide - Page 32
changes the display area (the part of projected images). • Normal specifications of the connected equipment when changing this setting. DVI-Video Level *1 (Setting is only possible when RGB video is being input from the [HDMI] input port and "EPSON Super White" is set to "Off".) If the projector - Epson EMP TW600 | User Guide - Page 33
standby mode, projection will start again. Trigger Out This turns the trigger function on and off to determine whether the projector's power on/off status and problems with projector operation are communicated to an external device. If you change the setting, the new setting will take effect after - Epson EMP TW600 | User Guide - Page 34
function. When a user's logo is recorded, the previous user's logo will be erased. Follow the instructions on the screen to record a user's logo. Selection or don't appear (Off). • Image signal, colour mode, aspect , test pattern and item name when memory settings are retrieved • Messages such as - Epson EMP TW600 | User Guide - Page 35
is set up in front of the screen. • Front/Ceiling : Select when the projector is set up in front of the screen and suspended from a ceiling. • Rear : Select when the projector is set up behind the screen. • Rear/Ceiling : Select when the projector is set up behind the screen and suspended from - Epson EMP TW600 | User Guide - Page 36
will not be reset. The "Save Memory" is reset by "Reset Memory". Reset Lamp Hours This initialises the lamp operating time. When this command is selected, the cumulative operating time for the lamp is cleared and returned to the default setting. Using the configuration menus Displaying a menu - Epson EMP TW600 | User Guide - Page 37
on. If the problem is still not solved after the lamp is replaced, stop using the projector and disconnect the power cable from the electrical outlet. Then contact your dealer or the nearest address provided in the "International Warranty Conditions" section of the Safety Instructions/World Wide - Epson EMP TW600 | User Guide - Page 38
switch at the rear of the projector is turned off before cool-down is complete, wait for the lamp to cool down (normally about one hour is required) before turning the power back on again. When the indicators provide no help If any of the following problems occur and the indicators do not - Epson EMP TW600 | User Guide - Page 39
Problem Solving Problems projector's control panel. Turn on the main power switch at the rear of the projector made correctly? Were the projector and computer connected while their computer that is connected to the projector off and then back on again. externally and to the LCD monitor? Set the image - Epson EMP TW600 | User Guide - Page 40
Problem Solving ■ The message "Not Supported." is displayed Are the image signal format settings correct output to the projector? Only when projecting images from a laptop computer or computer with a built-in LCD screen If the image signals are only being output to the computer's LCD monitor, you - Epson EMP TW600 | User Guide - Page 41
selected? Only when projecting computer images Set the computer so that the signals that are output are compatible with this projector. "List of Supported Monitor Displays" p.47 Computer documentation ■ Image is truncated (large) or small Has the correct aspect been selected? Press to select - Epson EMP TW600 | User Guide - Page 42
Problem Solving Has the correct resolution been selected? Only when projecting computer images Set the computer so that the signals that are output are compatible with this projector. "List of Supported Has the image contrast been adjusted correctly? Is the lamp due for replacement? Use the " - Epson EMP TW600 | User Guide - Page 43
Problem Solving ■ Projection stops automatically Is sleep mode active? When "Sleep Mode" has been set to On, the lamp turns off automatically if no signal is input for about 30 minutes, and the projector " in Safety Instructions/World-Wide Warranty Terms booklet. Problems with the remote - Epson EMP TW600 | User Guide - Page 44
describes maintenance tasks such as cleaning the projector and replacing consumable parts. Cleaning You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. Be sure to read the separate Safety Instructions/World-Wide Warranty Terms booklet for - Epson EMP TW600 | User Guide - Page 45
on TIP usage conditions such as Color Mode settings. If you continue to use the lamp after this period, the possibility of the lamp breaking becomes greater. When the lamp replacement message appears, replace the lamp with a new one as soon as possible, even if it is still working. • Depending on - Epson EMP TW600 | User Guide - Page 46
off the main power switch. Replacing the lamp If the lamp stops working and needs to be replaced, there is the danger that the lamp may already be broken. If replacing the lamp of a projector which has been installed to the ceiling, you should always assume that the lamp is broken and handle it - Epson EMP TW600 | User Guide - Page 47
straight. Make sure that it faces the correct way. Install the lamp and the lamp cover securely. The lamp will not turn on if the lamp or the lamp cover is not installed correctly. This product includes a lamp component that contains mercury (Hg). Please consult your state and local regurations - Epson EMP TW600 | User Guide - Page 48
Sub 15-pin) Use to connect the projector to a computer. Ceiling Mount* ELPMB20 (with ceiling plate) Use when installing the projector to a ceiling. Celling Pipe 600 (600 mm/white)* ELPFP07 Use when installing the projector to a high ceiling or a ceiling with veneer panels. * A special method of - Epson EMP TW600 | User Guide - Page 49
List of Supported Monitor Displays Depending on the setting, the output screen resolution will change slightly. Component Video Signal Resolution SDTV (525i, 60Hz)(D1) SDTV(625i, 50Hz) SDTV( - Epson EMP TW600 | User Guide - Page 50
List of Supported Monitor Displays Analog-RGB signals/signals input to the [HDMI ] input port Units: Dots Signal VGA 60 VESA72/75/ 85, iMac*1 Resolution 640×480 640× - Epson EMP TW600 | User Guide - Page 51
Specifications Product name Home Projector EMP-TW600 / EMP-TW520 *Model lineup varies depending on the country. Manual Zoom adjustment Lens shift Manual (appox. 1 : 1.5) Manual (Maximums: Approx. 100% vertically, 50% horizontally) Lamp (light source) UHE lamp, 170 W, Model No.: ELPLP35 - Epson EMP TW600 | User Guide - Page 52
Specifications ■ Angle of tilt If you set the projector higher than 15º, it could damage the projector and cause an accident. ■ RS-232C cable layout • Connector shape • Projector input connector : D-Sub 9-pin (male) : RS-232C - Epson EMP TW600 | User Guide - Page 53
operation. Trade Name Type of Product Model : EPSON : Projector : EMP-TW600 / EMP-TW520 FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are - Epson EMP TW600 | User Guide - Page 54
guide which may be unfamiliar or which were not explained in the manual signal (CbCr). Contrast The relative projector's lamp and internal components will remain at high temperatures, and this may shorten the useful life of the lamp or cause problems with the operation of the projector. The projector - Epson EMP TW600 | User Guide - Page 55
) is called "synchronization". If the signals are not synchronized, problems such as flickering, blurriness and horizontal interference can occur. Tracking The signals output from computers have a specific frequency. If the projector frequency does not match this frequency, the resulting images will - Epson EMP TW600 | User Guide - Page 56
replacement period (Remote control 13 Black Level 26,28 Brightness 26,28 C Ceiling Contrast 7,26,28 Control panel 6 Cool-down 15,36 Correcting keystone distortion 6,17 Correcting projector 8,12,49 K Keystone 6,17,27,31 L Lamp cover 8,44 Lamp Hours 27 Language 27,33 Lens cover 6,14 - Epson EMP TW600 | User Guide - Page 57
Replacing the air filter 44 Replacing the battery 13 Replacing the lamp 44 Reset 26,27,29,31,33 Reset All 27,34 "Reset" menu 27,34 Reset Lamp 27,31 Source 27 Specifications 49 Squeeze 19 Squeeze Through 19 sRGB 19,26 Startup Screen 27,32 Sub-menu 26 Supported Monitor Displays 47 S-Video - Epson EMP TW600 | User Guide - Page 58
- Epson EMP TW600 | User Guide - Page 59
alterations to this product, or (excluding the U.S.) failure to strictly comply with SEIKO EPSON CORPORATION's operating and maintenance instructions. SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising from the use of any options or any consumable products other than - Epson EMP TW600 | User Guide - Page 60
E Printed on 100% recycled paper. Printed in China 410361600 05.XX-.XA(G04)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
 |
 |
