Epson ES-600C User Manual - Transparency Unit - Page 6
Installing The Transparency Unit On The Scanner, Unit On The Scanner
View all Epson ES-600C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Note: l l Keep the shipping screw in a safe place; you will need it if you should need to transport the scanner. When transporting the scanner, you should remove the transparency unit and reattach the shipping screw. If the unit's lamp assembly is not in its initial position, you cannot attach the shipping screw. If this happens, reattach the unit to the scanner, close the unit, and turn the scanner on; the unit's lamp assembly then returns to its initial position. Then turn off the scanner and remove the transparency unit. Installing the Transparency Unit on the Scanner Follow the steps below to install the transparency unit on the scanner. 1. Make sure the scanner's power switch is turned off and remove the power cable from the scanner. 2. Remove the document cover from the scanner. 3. The scanner comes with two mounting screws attached; slide the mounting slots on the transparency unit forward underneath these two screws. 4