Epson ET-16600 Start Here - Installation Guide - Page 3

3 Insert paper with the glossy or printable side facedown. Note: Make sure the paper is loaded against the front edge guide and not sticking out from the end of the cassette. 4 Slide the side edge guides against the paper, but not too tightly. Note: Do not load paper above the arrow mark on the side edge guide. 5 Keep the cassette flat as you insert it all the way. 6 Select the paper settings on the product's control panel. 4 Connect the fax line 1 Connect a phone cord to a telephone wall jack and to the LINE port on your product. See the online User's Guide for more information. 2 Select Proceed on the LCD screen to set up the fax, or select Set Up Later to set it up later. 2 Insert the product CD (Windows only) or download and run your product's software package. For the latest software, visit: ET-16600 www.epson.com/support/et16600 (U.S.) www.epson.ca/support/et16600 (Canada) ET-16650 www.epson.com/support/et16650 (U.S.) www.epson.ca/support/et16650 (Canada) 3 Follow the instructions on the computer screen to run the setup program. 4 When you see the Select Your Connection screen, select one of the following: • Wireless connection In most cases, the software installer automatically attempts to set up your wireless connection. If setup is unsuccessful, you may need to enter your network name (SSID) and password. • Direct USB connection Make sure you have a USB cable (not included). • Wired network connection Make sure you have an Ethernet cable (not included). Mobile and voice-activated printing • Print directly from your Android™ (v4.4 or later) device*. Simply connect your printer and device to the same network and tap the menu icon to select the print option. • Print from wherever you are, next to your printer or remotely, with Epson Connect™. Learn more at www.epson.com/ connect (U.S.) or www.epson.ca/connect (Canada). • Use voice-activated assistants to print a variety of creative and everyday items from your Epson product. Simply add your product to an Epson Connect account, then link the account to a voice-activated assistant. See www.epson.com/voice (U.S.) or www.epson.ca/voice (Canada) for more information. * May require the Epson Print Enabler or Mopria Print Service app from Google Play™. 5 Install software Note: If you are using a Mac or your computer does not have a CD/DVD drive, an Internet connection is required to obtain the product software. 1 Make sure the product is NOT CONNECTED to your computer. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. Any problems? Network setup was unsuccessful. • Make sure you select the right network name (SSID). • Restart your router (turn it off and then on), then try to connect to it again. • If you see a firewall alert message, click Unblock or Allow to let setup continue. • If your network has security enabled, make sure you enter your network password (WEP key or WPA passphrase) correctly. Be sure to enter your password in the correct case.