Epson ET-2400 Start Here - Installation Guide

8

Close the ink tank cover.

9

Press the

power button to turn on the product, then

wait for the

power and the

ink lights to stay on. The

Wi-Fi lights flash alternately.

10

Press and hold the

stop button for

5 seconds

until the

power light starts to flash and ink charging begins. Ink

charging takes about

11 minutes

.

Note:

When the

power light stops flashing, ink charging is

complete. Once initial setup of the printer is complete, you can

top off the ink tanks with any remaining ink. See the online

User’s

Guide

for instructions.

Caution:

Do not unplug or turn off the product, or open the front

cover while the product is charging or you’ll waste ink.

Note:

After some ink is used for charging, the rest is available

for printing.

Caution:

After setup, periodically inspect the ink levels to ensure they

do not fall below the

lowest lines on the tanks. Prolonged use when

any level is below the lowest line could damage the product. See the

online

User’s Guide

for refilling instructions.

IMPORTANT:

Before using this product, make sure you read

these instructions and the safety instructions in the online

User’s Guide

.

1

Unpack

Note:

Do not open the ink bottles until you are ready to fill the ink

tanks. The ink bottles are vacuum packed to maintain reliability.

1

Remove all protective materials from the product.

2

Connect the power cord to the back of the product and to

an electrical outlet.

Note:

Do not connect your product to your computer yet.

2

Choose a setup method

The Epson Smart Panel

®

app can help you set up your printer

through an interactive, step-by-step process using your

smartphone or tablet.

If you do not want to

use a mobile device for

setup, skip to the “Fill ink

tanks” section below.

To use your mobile device

for setup, continue to

step 1.

OR

1

Download the Epson Smart Panel app

from your device’s app store. Do not

launch the app yet.

2

Press the

power button to turn on the product.

Note:

Do not connect your product to your computer yet.

3

Launch the app and follow the instructions to set up your

product. If necessary, tap the

+

icon on the top right corner

of the app’s home screen, tap

Start setting up

, and follow

the instructions to set up your product.

For information on connecting your product to a computer,

using voice-activated printing, solving problems, or for details

on reaching Epson support, see the sections on the back of this

sheet.

3

Fill ink tanks

Warning:

Keep the ink bottles out of the reach of children and do not

drink the ink.

Caution:

This product requires careful handling of ink. If ink spills, wipe

it off immediately with a damp towel to avoid permanent stains. If ink gets

on your clothes or belongings, it may not come off.

Note:

•

Epson cannot guarantee the quality or reliability of third-party ink.

•

Use the ink bottles included with the printer to set up the product. Part

of the ink will be used to charge the print head. These bottles may print

fewer pages compared with replacement ink bottles.

•

Epson strongly recommends the use of genuine ink to ensure optimal

print quality and performance.

1

Open the ink tank

cover, then open the cap

for the black (BK) ink

tank.

Note:

Refer to the

color-coded sticker

on the ink tank unit to

identify the color of each tank.

2

Unpack the black (BK) ink bottle. Hold the ink bottle upright

and slowly turn the bottle cap to remove it.

Caution:

Do not shake or squeeze the ink bottle. Do not touch the

top of the ink bottle after its cap is removed.

3

Insert the ink bottle into the filling port.

Note:

Do not force the bottle into position; each bottle is keyed for

each color.

4

Wait for the ink to fill the tank.

Do not squeeze the bottle or

allow it to contact any other

surface.

Note:

Ink flows into the tank and

stops automatically when the ink

tank is filled to the upper line. If ink

does not flow from the bottle, lift and

reinsert the bottle.

5

When the ink tank is full, remove the ink bottle and securely

close it with the bottle cap. If any ink remains in the bottle,

store the bottle upright for later use.

Note:

Do not leave the ink bottle inserted; otherwise the bottle may

be damaged or ink may leak.

6

Securely close the black ink tank cap.

7

Repeat the previous steps for the other colors.

Start Here

ET-2400

Epson ET-2400 Start Here - Installation Guide

Epson ET-2400 Manual

Epson ET-2400 manual content summary: