Epson ET-2400 Start Here - Installation Guide - Page 1

ET-2400 Start Here IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User's Guide. 1 Unpack 2 Choose a setup method The Epson Smart Panel® app can help you set up your printer through an interactive, step-by-step process using your smartphone or tablet. OR To use your mobile device for setup, continue to step 1. If you do not want to use a mobile device for setup, skip to the "Fill ink tanks" section below. 1 Download the Epson Smart Panel app from your device's app store. Do not launch the app yet. 2 Unpack the black (BK) ink bottle. Hold the ink bottle upright and slowly turn the bottle cap to remove it. 8 Close the ink tank cover. Caution: Do not shake or squeeze the ink bottle. Do not touch the top of the ink bottle after its cap is removed. 3 Insert the ink bottle into the filling port. 9 Press the power button to turn on the product, then wait for the power and the ink lights to stay on. The Wi-Fi lights flash alternately. Note: Do not open the ink bottles until you are ready to fill the ink tanks. The ink bottles are vacuum packed to maintain reliability. 1 Remove all protective materials from the product. 2 Connect the power cord to the back of the product and to an electrical outlet. Note: Do not connect your product to your computer yet. 2 Press the power button to turn on the product. Note: Do not connect your product to your computer yet. 3 Launch the app and follow the instructions to set up your product. If necessary, tap the + icon on the top right corner of the app's home screen, tap Start setting up, and follow the instructions to set up your product. For information on connecting your product to a computer, using voice-activated printing, solving problems, or for details on reaching Epson support, see the sections on the back of this sheet. 3 Fill ink tanks Warning: Keep the ink bottles out of the reach of children and do not drink the ink. Caution: This product requires careful handling of ink. If ink spills, wipe it off immediately with a damp towel to avoid permanent stains. If ink gets on your clothes or belongings, it may not come off. Note: • Epson cannot guarantee the quality or reliability of third-party ink. • Use the ink bottles included with the printer to set up the product. Part of the ink will be used to charge the print head. These bottles may print fewer pages compared with replacement ink bottles. • Epson strongly recommends the use of genuine ink to ensure optimal print quality and performance. 1 Open the ink tank cover, then open the cap for the black (BK) ink tank. Note: Refer to the color-coded sticker on the ink tank unit to identify the color of each tank. Note: Do not force the bottle into position; each bottle is keyed for each color. 4 W ait for the ink to fill the tank. Do not squeeze the bottle or allow it to contact any other surface. Note: Ink flows into the tank and stops automatically when the ink tank is filled to the upper line. If ink does not flow from the bottle, lift and reinsert the bottle. 5 When the ink tank is full, remove the ink bottle and securely close it with the bottle cap. If any ink remains in the bottle, store the bottle upright for later use. Note: Do not leave the ink bottle inserted; otherwise the bottle may be damaged or ink may leak. 6 Securely close the black ink tank cap. 7 R epeat the previous steps for the other colors. 10 Press and hold the stop button for 5 seconds until the power light starts to flash and ink charging begins. Ink charging takes about 11 minutes. Note: When the power light stops flashing, ink charging is complete. Once initial setup of the printer is complete, you can top off the ink tanks with any remaining ink. See the online User's Guide for instructions. Caution: Do not unplug or turn off the product, or open the front cover while the product is charging or you'll waste ink. Note: After some ink is used for charging, the rest is available for printing. Caution: After setup, periodically inspect the ink levels to ensure they do not fall below the lowest lines on the tanks. Prolonged use when any level is below the lowest line could damage the product. See the online User's Guide for refilling instructions.