Epson ET-2650 Start Here - Installation Guide - Page 3

2 Slide the edge guide to the left. 3 Load paper, glossy or printable side up and short edge first, against the right side of the rear paper feed slot. 4 Slide the edge guide against the paper, but not too tightly, and flip the feeder guard back. 5 Pull out the output tray and raise the paper stopper. 2 Insert the product CD or download and run your product's software package: www.epson.com/support/et2650 (U.S.) or www.epson.ca/support/et2650 (Canada) 3 Follow the instructions on the screen to run the setup program. 4 When you see the Select Your Connection screen, select one of the following: • Wireless connection In most cases, the software installer automatically attempts to set up your wireless connection. If setup is unsuccessful, you may need to enter your network name (SSID) and password. • Direct USB connection Make sure you have a USB cable (not included). Mobile printing options Connect wirelessly from your smartphone, tablet, or computer. Print documents and photos from across the room or around the world: • Print directly from your iPhone, iPad, or iPod touch. Simply connect your printer and device to the same network and tap the action icon to select the print option. • Use Epson Print Enabler (free from Google Play™) with Android™ devices (v4.4 or later). Then connect your printer and device to the same network and tap the menu icon to select the print option. • Print remotely with Epson Connect™ and Google Cloud Print™. See your online User's Guide for instructions or learn more at www.epsonconnect.com. 6 Select the paper settings on the product's control panel. 4 Install software Note: If your computer does not have a CD/DVD drive or you are using a Mac, an Internet connection is required to obtain the product software. To print from a Chromebook™, go to www.epson.com/support/gcp (U.S.) or www.epson.ca/support/gcp (Canada) for instructions. 1 Make sure the product is NOT CONNECTED to your computer. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. Any problems? Network setup was unsuccessful • Make sure you select the right network name (SSID). • Restart your router (turn it off and then on), then try to connect to it again. • The printer can only connect to a network that supports 2.4 GHz connections. If your router offers both 2.4 GHz and 5 GHz connections, make sure the 2.4 GHz network is enabled. • If you see a firewall alert message, click Unblock or Allow to let setup continue. • If your network has security enabled, make sure you enter your network password (WEP key or WPA passphrase) correctly. Be sure to enter your password in the correct case. Press to toggle between upper case letters, lower case letters, numbers, and symbols. There are lines or incorrect colors in my printouts Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. See the online User's Guide for more information.