Epson ET-3850U for ReadyPrint Start Here - Installation Guide - Page 3

4 Load paper See the online User's Guide for information about loading capacity, available paper types and sizes, using the ADF, and loading envelopes. 1 Make sure the product is not charging ink, and then open the front of the paper cassette and pull out the paper cassette. 2 Slide the side edge guides all the way out. 3 Insert paper with the glossy or printable side down. 5 Install software Note: • An Internet connection is required to obtain the product software. • To print from a Chromebook™, go to http://epson.com/support/chromebookprint for instructions. 1 Make sure the product is NOT CONNECTED to your computer. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. 2 Download and run your product's software package: http://epson.com/support/et3850u 3 Follow the instructions on the computer screen to run the setup program. 4 When you see the Select Your Connection screen, select one of the following and follow the on-screen instructions: • Wireless connection In most cases, the software installer automatically attempts to set up your wireless connection. If setup is unsuccessful, you may need to enter your network name (SSID) and password. • Direct USB connection Make sure you have a USB cable (not included). • Wired network connection Make sure you have an Ethernet cable (not included). Note: Make sure the paper is loaded against the front edge guide and not sticking out from the end of the cassette. 4 Slide the side edge guides against the paper, but not too tightly. Close the front of the cassette. 5 Keep the cassette flat as you insert it all the way. 6 Pull out the output tray. 7 Select the paper settings on the product's control panel. Mobile and voice-activated printing • Print directly from your Android™ (v4.4 or later) device*. Simply connect your printer and device to the same network and tap the menu icon to select the print option. • Turn your mobile device into an intuitive, easy-to-use printing and scanning control center with Epson Smart Panel. Download the app from your mobile device's app store. • Print from wherever you are, next to your printer or remotely, with Epson Connect™. Learn more at http://epson.com/connect. • Use voice-activated assistants to print a variety of creative and everyday items from your Epson product. Simply add your product to an Epson Connect account, then link the account to a voice-activated assistant. See http://epson.com/voice for more information. * May require the Epson Print Enabler or Mopria Print Service app from Google Play™. Any problems? Network setup was unsuccessful. • Make sure you select the right network name (SSID). • Restart your router (turn it off and then on), then try to connect to it again. • The printer can only connect to a network that supports 2.4 GHz connections. If your router offers both 2.4 GHz and 5 GHz connections, make sure 2.4 GHz is enabled.