Epson ET-4550 User Manual - Page 3

4 Slide the side edge guides against the paper, but not too tightly. 5 Keep the cassette flat as you insert it all the way in. 6 Pull out the output tray. 7 Select the paper settings on the product's control panel. 4 Connect the fax line 1 Connect a phone cord to a telephone wall jack and to the LINE port on your product. See the online User's Guide for more information. 2 Press on the control panel if you want to set up the fax, or press to set it up later. 5 Install software Note: If your computer does not have a CD/DVD drive or you are using a Mac, an Internet connection is required to obtain the product software. 1 Make sure the product is NOT CONNECTED to your computer. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. 2 Insert the product CD or download and run your product's software package: epson.com/support/et4550 (U.S.) or epson.ca/support/et4550 (Canada) 3 Follow the instructions on the screen to run the setup program. OS X: Make sure you install Software Updater to receive firmware and software updates for your product. 4 When you see the Select Your Connection screen, select one of the following: • Wireless connection In most cases, the software installer automatically attempts to set up your wireless connection. If setup is unsuccessful, you may need to enter your network name (SSID) and password. • Direct USB connection Make sure you have a USB cable (not included). • Wired network connection Make sure you have an Ethernet cable (not included). Mobile printing options To print from a mobile device, your product must be set up for wireless printing or Wi-Fi Direct®. See the online User's Guide for instructions. iOS/Android™ epson.com/iprint Epson Connect™ Connect wirelessly from your tablet, smartphone, or computer. Print documents and photos from across the room or around the world. epson.com/connect Any problems? Network setup was unsuccessful. • Make sure you select the right network name (SSID). The product can only connect to a network that supports 2.4 GHz. • If you see a firewall alert message, click Unblock or Allow to let setup continue. • If your network has security enabled, make sure you enter your network password (WEP key or WPA passphrase) correctly. Passwords must be entered in the correct case. There are lines or incorrect colors in my printouts. Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. See the online User's Guide for more information. The product's screen is dark. Make sure your product is turned on and press any button to wake it from sleep mode.