Epson ET-4850 Start Here - Installation Guide - Page 2

Connect the fax line, ET-4850, Install software, Load paper, Mobile and voice-activated, printing,

Page 2 highlights

15 Follow the on-screen instructions to adjust the print quality of your product. Note: • You need to load paper before you can adjust the print quality. See "Load paper" on this sheet for details. • Select Adjust Later if you want to adjust the print quality later. For more information, see the online User's Guide. Caution: After setup, periodically inspect the ink levels to ensure they do not fall below the lowest lines on the tanks. Prolonged use when ink is below the lowest line could damage the product. See the online User's Guide for refilling instructions. 4 Load paper See the online User's Guide for information about loading capacity, available paper types and sizes, using the ADF (ET-3850/ET-4850), and loading envelopes. 1 Make sure the product is not charging ink, and then open the front of the paper cassette and pull out the paper cassette. 2 Slide the side edge guides all the way out. 3 Insert paper with the glossy or printable side down. Note: Make sure the paper is loaded against the front edge guide and not sticking out from the end of the cassette. 4 Slide the side edge guides against the paper, but not too tightly. Close the front of the cassette. 5 Keep the cassette flat as you insert it all the way. 6 Pull out the output tray. 7 Select the paper settings on the product's control panel. 5 Connect the fax line (ET-4850) 1 Connect a phone cord to a telephone wall jack and to the LINE port on your product. See the online User's Guide for more information. 2 Select Proceed on the LCD screen to set up the fax, or select Set Up Later to set it up later. 6 Install software Note: • If your product did not include a CD, if you are using a Mac, or if your computer does not have a CD/DVD drive, an Internet connection is required to obtain the product software. • To print from a Chromebook™, go to www.epson.com/support/chromebookprint (U.S.) or www.epson.ca/support/chromebookprint (Canada) for instructions. 1 Make sure the product is NOT CONNECTED to your computer. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. 2 Insert the product CD (Windows only) or download and run your product's software package. For the latest software, visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and search for your product. 3 Follow the instructions on the computer screen to run the setup program. 4 When you see the Select Your Connection screen, select one of the following and follow the on-screen instructions: • Wireless connection In most cases, the software installer automatically attempts to set up your wireless connection. If setup is unsuccessful, you may need to enter your network name (SSID) and password. • Direct USB connection Make sure you have a USB cable (not included). • Wired network connection Make sure you have an Ethernet cable (not included). Mobile and voice-activated printing • Print directly from your Android™ (v4.4 or later) device*. Simply connect your printer and device to the same network and tap the menu icon to select the print option. • Turn your mobile device into an intuitive, easy-to-use printing and scanning control center with Epson Smart Panel. Download the app from your mobile device's app store. • Print from wherever you are, next to your printer or remotely, with Epson Connect™. Learn more at www.epson.com/connect (U.S.) or www.epson.ca/connect (Canada). • Use voice-activated assistants to print a variety of creative and everyday items from your Epson product. Simply add your product to an Epson Connect account, then link the account to a voice-activated assistant. See www.epson.com/voice (U.S.) or www.epson.ca/voice (Canada) for more information. * May require the Epson Print Enabler or Mopria Print Service app from Google Play™. Any problems? Network setup was unsuccessful. • Make sure you select the right network name (SSID). • Restart your router (turn it off and then on), then try to connect to it again. • If you see a firewall alert message, click Unblock or Allow to let setup continue. • If your network has security enabled, make sure you enter your network password (WEP key or WPA passphrase) correctly. Be sure to enter your password in the correct case. • Print a network connection report to identify network problems and solutions. See your online User's Guide for instructions. There are lines or incorrect colors in my printouts. Run a nozzle check to see if there are any gaps in the printout. Then clean the print head, if necessary. See the online User's Guide for more information. The product's screen is dark. Make sure your product is turned on, and press any button (ET-3830/ET-3850) or touch the screen (ET-4850) to wake it from sleep mode. Setup is unable to find my product after connecting it with a USB cable. Make sure your product is on and the USB cable is securely connected. Any questions? User's Guide Windows: Click the icon on your desktop or Apps screen to access the online User's Guide. Mac: Click the icon in Applications/Epson Software/Guide to access the online User's Guide. If you don't have a User's Guide icon, go to the Epson website, as described in "Technical support." Technical support Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and search for your product to download drivers, view videos and manuals, get FAQs, or contact Epson. Call (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Recycling Epson offers a recycling program for end-of-life hardware and ink bottles. Please go to www.epson.com/recycle (U.S.) or www.epson.ca/recycle (Canada) for information on how to return your products for proper disposal. Need paper and ink? Ensure brilliant results with Epson specialty and plain papers, engineered specifically for Epson printers. Find Epson papers and Epson Genuine Ink at www.epson.com (U.S. sales) or www.epson.ca (Canadian sales) and at Epson authorized resellers. Call 800-GO-EPSON (800-463-7766). ET-3830/ET-3850/ET-4850 replacement inks Black 502120 Cyan 502220 Magenta 502320 Yellow 502420 EPSON and Epson Smart Panel are registered trademarks, EPSON Exceed Your Vision is a registered logomark, and Epson Connect is a trademark of Seiko Epson Corporation. Designed for Excellence is a trademark of Epson America, Inc. Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the U.S. and other countries. Android, Chromebook, and Google Play are trademarks of Google LLC. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2021 Epson America, Inc., 2/21 Printed in XXXXXX CPD-60031

  • 1
  • 2

5
Keep the cassette flat as you insert it all the way
.
6
Pull out the output tray.
7
Select the paper settings on the product’s control panel.
5
Connect the fax line
(ET-4850)
1
Connect a phone cord to a telephone wall jack and to the
LINE
port on your product. See the online
User’s Guide
for more information.
2
Select
Proceed
on the LCD screen to set up the fax, or
select
Set Up Later
to set it up later.
6
Install software
Note:
If your product did not include a CD, if you are using a Mac,
or if your computer does not have a CD/DVD drive, an Internet
connection is required to obtain the product software.
To print from a Chromebook™, go to
www.epson.com/support/chromebookprint
(U.S.) or
www.epson.ca/support/chromebookprint
(Canada) for
instructions.
1
Make sure the product is
NOT CONNECTED
to your
computer.
Windows
®
:
If you see a Found New Hardware screen, click
Cancel
and disconnect the USB cable.
2
Insert the product CD (Windows only) or download and
run your product’s software package. For the latest
software, visit
www.epson.com/support
(U.S.) or
www.epson.ca/support
(Canada) and search for your
product.
3
Follow the instructions on the computer screen to run the
setup program.
4
When you see the Select Your Connection screen, select
one of the following and follow the on-screen instructions:
Wireless connection
In most cases, the software installer automatically
attempts to set up your wireless connection. If setup
is unsuccessful, you may need to enter your network
name (SSID) and password.
Direct USB connection
Make sure you have a USB cable (not included).
Wired network connection
Make sure you have an Ethernet cable (not included).
EPSON and Epson Smart Panel are registered trademarks, EPSON Exceed Your Vision is a
registered logomark, and Epson Connect is a trademark of Seiko Epson Corporation.
Designed for Excellence is a trademark of Epson America, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other
countries.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
Android, Chromebook, and Google Play are trademarks of Google LLC.
General Notice: Other product names used herein are for identification purposes only and may
be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2021 Epson America, Inc., 2/21
Printed in XXXXXX
CPD-60031
15
Follow the on-screen instructions to adjust the print
quality of your product.
Note:
You need to load paper before you can adjust the print quality.
See “Load paper” on this sheet for details.
Select
Adjust Later
if you want to adjust the print quality later.
For more information, see the online
User’s Guide
.
Caution:
After setup, periodically inspect the ink levels to ensure they
do not fall below the
lowest lines on the tanks. Prolonged use when
ink is below the lowest line could damage the product. See the online
User’s Guide
for refilling instructions.
4
Load paper
See the online
User’s Guide
for information about loading
capacity, available paper types and sizes, using the ADF
(ET-3850/ET-4850), and loading envelopes.
1
Make sure the product is not charging ink, and then open
the front of the paper cassette and pull out the paper
cassette.
2
Slide the side edge guides all the way out.
3
Insert paper with the glossy or printable side down.
Note:
Make sure the paper is loaded against the front edge
guide and not sticking out from the end of the cassette.
4
Slide the side edge guides against the paper, but not too
tightly. Close the front of the cassette.
Mobile and voice-activated
printing
Print directly from your Android™ (v4.4 or later) device*.
Simply connect your printer and device to the same network
and tap the menu icon to select the print option.
Turn your mobile device into an intuitive, easy-to-use
printing and scanning control center with Epson Smart
Panel. Download the app from your mobile device’s app
store.
Print from wherever you are, next to your printer or
remotely, with Epson Connect™. Learn more at
www.epson.com/connect
(U.S.) or
www.epson.ca/connect
(Canada).
Use voice-activated assistants to print a variety of creative
and everyday items from your Epson product. Simply add
your product to an Epson Connect account, then link the
account to a voice-activated assistant. See
www.epson.com/voice
(U.S.) or
www.epson.ca/voice
(Canada) for more information.
*
May require the Epson Print Enabler or Mopria Print Service app from
Google Play™.
Any problems?
Network setup was unsuccessful.
Make sure you select the right network name (SSID).
Restart your router (turn it off and then on), then try to
connect to it again.
If you see a firewall alert message, click
Unblock
or
Allow
to let setup continue.
If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. Be sure to enter your password in the correct
case.
Print a network connection report to identify network
problems and solutions. See your online
User’s Guide
for
instructions.
There are lines or incorrect colors in my printouts.
Run a nozzle check to see if there are any gaps in the printout.
Then clean the print head, if necessary. See the online
User’s
Guide
for more information.
The product’s screen is dark.
Make sure your product is turned on, and press any button
(ET-3830/ET-3850) or touch the screen (ET-4850) to wake it
from sleep mode.
Setup is unable to find my product after connecting it
with a USB cable.
Make sure your product is on and the USB cable is securely
connected.
Any questions?
User’s Guide
Windows:
Click the icon on your desktop or Apps screen to
access the online
User’s Guide
.
Mac:
Click the icon in Applications/Epson Software/Guide to
access the online
User’s Guide.
If you don’t have a User’s Guide icon, go to the Epson website,
as described in “Technical support.”
Technical support
Visit
www.epson.com/support
(U.S.) or
www.epson.ca/support
(Canada) and search for your product
to download drivers, view videos and manuals, get FAQs, or
contact Epson.
Call (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6
AM
to
8
PM
,
Pacific Time, Monday through Friday, and 7
AM
to 4
PM
,
Pacific Time, Saturday. Days and hours of support are subject
to change without notice. Toll or long distance charges may
apply.
Recycling
Epson offers a recycling program for end-of-life hardware and
ink bottles. Please go to
www.epson.com/recycle
(U.S.) or
www.epson.ca/recycle
(Canada) for information on how to
return your products for proper disposal.
Need paper and ink?
Ensure brilliant results with Epson specialty and plain papers,
engineered specifically for Epson printers.
Find Epson papers
and Epson Genuine Ink at
www.epson.com
(U.S. sales) or
www.epson.ca
(Canadian sales) and at Epson authorized
resellers. Call 800-GO-EPSON (800-463-7766).
ET-3830/ET-3850/ET-4850 replacement inks
Black
Cyan
Magenta
Yellow
502120
502220
502320
502420