Epson ET-5150 Start Here - Installation Guide - Page 3
Load paper, Connect the fax line(ET-5170), Install software, Mobile and voice-activatedprinting - ink
View all Epson ET-5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
3 Load paper See the online User's Guide for information about loading capacity, available paper types and sizes, loading envelopes, and using the rear paper feed slot or ADF. 1 Make sure the product is done charging the ink. Open the paper cassette cover and pull out the paper cassette until it stops. 2 Slide the side edge guides all the way out. 3 Insert paper with the printable side down and slide the edge guides against the paper, but not too tightly. 4 Keep the cassette flat as you insert it all the way and then close the paper cassette cover. 5 Install software Note: • If you are using a Mac or your computer does not have a CD/DVD drive, an Internet connection is required to obtain the product software. • To print from a Chromebook™, go to www.epson.com/support/chromebookprint (U.S.) or www.epson.ca/support/chromebookprint (Canada) for instructions. 1 Make sure the product is NOT CONNECTED to your computer. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. 2 Insert the product CD (Windows only) or download and run your product's software package. For the latest software, visit: ET-5150 www.epson.com/support/et5150 (U.S.) www.epson.ca/support/et5150 (Canada) ET-5170 www.epson.com/support/et5170 (U.S.) www.epson.ca/support/et5170 (Canada) 3 Follow the instructions on the computer screen to run the setup program. 4 When you see the Select Your Connection screen, select one of the following: • Wireless connection In most cases, the software installer automatically attempts to set up your wireless connection. If setup is unsuccessful, you may need to enter your network name (SSID) and password. • Direct USB connection Make sure you have a USB cable (not included). • Wired network connection Make sure you have an Ethernet cable (not included). Note: Make sure the paper is loaded against the front of the cassette. 5 Select the paper settings on the product's control panel. 4 Connect the fax line (ET-5170) 1 Connect a phone cord to a telephone wall jack and to the LINE port on your product. See the online User's Guide for more information. 2 Select Proceed on the LCD screen to set up the fax, or select Set Up Later to set it up later. Mobile and voice-activated printing • Print directly from your Android™ (v4.4 or later) device*. Simply connect your printer and device to the same network and tap the menu icon to select the print option. • Turn your mobile device into an intuitive, easy-to-use printing and scanning control center with Epson Smart Panel®. Download the app from your mobile device's app store. • Print from wherever you are, next to your printer or remotely, with Epson Connect™. Learn more at www.epson.com/connect (U.S.) or www.epson.ca/connect (Canada).