Epson ET-M2170 Start Here - Installation Guide - Page 1

Epson ET-M2170 Manual

Get Epson ET-M2170 PDF manuals and user guides View all Epson ET-M2170 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

ET-M2170 Start Here IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User's Guide. 1 Unpack 2 Fill ink tank and charge the ink Warning: Keep the ink bottle out of the reach of children and do not drink the ink. Caution: This product requires careful handling of ink. If ink spills, wipe it off immediately with a damp towel to avoid permanent stains. If ink gets on your clothes or belongings, it may not come off. Note: • Epson cannot guarantee the quality or reliability of third-party ink. • Use the ink bottle included with the printer to set up the product. Part of the ink will be used to charge the print head. This bottle may print fewer pages compared with replacement ink bottles. 1 Open the ink tank cover, then open the cap. Make sure you keep the box shown above for use when transporting the printer. Caution: Do not lift the product by gripping the scanner unit. Make sure you lift using the handholds on the bottom of the product. Note: Do not open the ink bottle until you are ready to fill the ink tank. The ink bottle is vacuum packed to maintain reliability. 1 Lift the printer cover until it clicks into place. 2 Unpack the ink bottle. Hold the ink bottle upright and slowly turn the bottle cap to remove it. 2 Remove all protective materials from the product. Caution: Do not shake or squeeze the ink bottle. Do not touch the top of the ink bottle after its cap is removed. 3 Insert the ink bottle into the filling port, as shown below. Caution: Do not touch the flat white cable, translucent film, or the ink tubes. 3 Close the printer cover. Note: Do not connect the power cord yet. Note: Do not force the bottle into position. 4 Wait for the ink to fill the tank. Do not squeeze the bottle. Note: If ink does not flow from the bottle, lift and reinsert the bottle. Caution: After setup, periodically inspect the ink level to ensure it is not below the lowest line on the tank. Prolonged use when ink is below the lowest line could damage the product. See the online User's Guide for refilling instructions.

  • 1
  • 2
  • 3
  • 4
Start Here
IMPORTANT:
Before using this product, make sure you read
these instructions and the safety instructions in the online
User’s Guide
.
1
Unpack
Make sure you keep the box shown above for use when
transporting the printer.
Caution:
Do not lift the product by gripping the scanner unit. Make
sure you lift using the handholds on the bottom of the product.
Note:
Do not open the ink bottle until you are ready to fill the ink tank.
The ink bottle is vacuum packed to maintain reliability.
1
Lift the printer cover until it clicks into place.
2
Remove all protective materials from the product.
Caution:
Do not touch the flat white cable, translucent film, or
the ink tubes.
3
Close the printer cover.
Note:
Do not connect the power cord yet.
2
Fill ink tank and charge
the ink
Warning:
Keep the ink bottle out of the reach of children and do not
drink the ink.
Caution:
This product requires careful handling of ink. If ink spills,
wipe it off immediately with a damp towel to avoid permanent stains. If
ink gets on your clothes or belongings, it may not come off.
Note:
• Epson cannot guarantee the quality or reliability of third-party ink.
• Use the ink bottle included with the printer to set up the product.
Part of the ink will be used to charge the print head. This bottle may
print fewer pages compared with replacement ink bottles.
1
Open the ink tank cover, then open the cap.
2
Unpack the ink bottle. Hold the ink bottle upright and
slowly turn the bottle cap to remove it.
Caution:
Do not shake or squeeze the ink bottle. Do not touch
the top of the ink bottle after its cap is removed.
3
Insert the ink bottle into the filling port, as shown below.
Note:
Do not force the bottle into position.
4
Wait for the ink to fill the tank. Do not squeeze the bottle.
Note:
If ink does not flow from the bottle, lift and reinsert the
bottle.
Caution:
After setup, periodically inspect the ink level to ensure
it is not below the lowest line on the tank. Prolonged use when
ink is below the lowest line could damage the product. See the
online
User’s Guide
for refilling instructions.
ET-M2170