Epson EX3220 Quick Setup and Warranty - Page 2
Using the remote control, Project wirelessly - driver
View all Epson EX3220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
3 EX5220/EX6220/EX7220: To reduce or enlarge the image, turn the zoom ring. EX3220: To reduce or enlarge the image, press the Tele (reduce) or Wide (enlarge) buttons on the projector. EX5220 EX6220 EX7220 EX3220 4 Turn the focus ring to sharpen the image. EX5220 EX6220 EX7220 EX3220 5 If your image looks like or , you may have placed the projector off to one side of the screen at an angle. Place the projector directly in front of the center of the screen, facing the screen squarely. If you can't move the projector, use the horizontal slider on the projector to correct the image. EX5220 EX6220 EX7220 EX3220 6 Your projector automatically adjusts images that look like or , but if necessary you can press the or button on the projector to correct it. Using the remote control Make sure the batteries are installed as shown (two AA batteries). Project wirelessly Follow the steps here to connect the projector wirelessly over an 802.11n, 802.11g, or 802.11b wireless network. With the EX3220 and EX6220, you will need the optional wireless LAN module (part number V12H418P12). If you're projecting from a computer, it must have a wireless card or built-in wireless interface, and be running Windows 8, Windows 7, Windows Vista®, Windows XP Professional x64, or Windows XP, or Mac OS X 10.4.11 to 10.8.x. 1 Remove the wireless LAN module cover screw. 2 Connect the wireless LAN module to the projector's USB-A (flat) port. 3 To configure your projector for your wireless network, do one of the following: • If you're using the optional Quick Wireless Connection USB key (Windows only, part number V12H005M09), press the LAN button on the remote control. When you see SSID and IP address information on the screen, remove the wireless LAN module and connect the key to the projector's USB-A port. Look for the displayed message, remove the key, and connect it to a USB port on your computer. Follow the on-screen instructions to install the driver, then run your presentation. For details, see the online User's Guide. • If you're not using the key, continue with the steps below. 4 Attach the wireless LAN module cover and secure it using the screw you removed. Turn projector on and off Choose which source to display Access projector menus Navigate projector menus Turn off projector display Get solutions to common problems For more information on using the remote control, see the online User's Guide. 5 Press the Menu button on the remote control, select the Network menu, and press . 6 Choose Network Configuration and press .