Epson EX5260 Quick Setup - Page 2
Using the remote control, Setting up a wirelessconnection, Install the LAN module EX5260/Pro EX9210
View all Epson EX5260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
3 Open the A/V Mute slide all the way. 4 Press the power button on the projector or remote control. The projector beeps, the Status light flashes blue, and then stays on. Note: To shut down the projector, press the power button twice. 5 Use the arrow buttons on the remote control to highlight any of the options on the Home screen that appears, then press to select it. You can switch between projection sources and quickly access various adjustment options from this screen. 5 If your image looks like or , you may have placed the projector off to one side of the screen at an angle. Place the projector directly in front of the center of the screen, facing the screen squarely. If you can't move the projector, use the horizontal keystone slider on the projector to correct the image shape. 6 Your projector automatically adjusts images that look like or , but if necessary you can press the or button on the projector to correct it. Using the remote control Install the batteries as shown (two AA batteries). Turn projector on and off Choose which source to display 6 The default language of the menu system is English. To select another language, press the Menu button on the projector or remote control. Select Extended and press . Select Language and press . Select your language and press . Press the Menu button to exit the menu system. Adjust the image 1 If you don't see an image, press the Source Search button on the projector or the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position. Access projector menus Navigate projector menus Turn off projector display Access the Home screen For more information on using the remote control, see the online User's Guide. Setting up a wireless connection Follow the steps here to set up the projector for a wireless connection. Install the LAN module (EX5260/Pro EX9210) 1 Remove the wireless LAN module cover screw. 3 To reduce or enlarge the image, turn the zoom ring. 4 To sharpen the image, turn the focus ring. 2 Insert the included wireless LAN module into the USB-A port.