Epson EX7230 Pro Quick Setup - Page 3

4 Attach the wireless LAN module cover and secure it using the screw you removed. 5 Press the Menu button on the remote control, select the Network menu, and press . 6 Choose Network Configuration and press . 7 Select the Wireless LAN menu and press . 8 Choose Connection Mode, press , select Quick (for a direct connection to a computer, tablet, or smartphone) or Advanced (for a connection to a router or access point), then press again. When you're finished, press Esc to return to the Wireless LAN menu. 9 If you chose the Advanced connection mode, select SSID, press and enter your network name (SSID) on the screen that appears. 12 When you're finished selecting settings in the Wireless LAN menu, press Esc. 13 If you are connecting the projector to a secure network, select the Security menu and press . Then select settings and press Esc when you're finished. 14 Select Complete and press save your settings. , then select Yes and press again to 15 See "Install network software" for additional instructions. Install network software To project over the network, download and install the EasyMP® Network Projection software on each computer that you will project from. To monitor and control your projector over the network, download and install the EasyMP Monitor software (Windows only). Click the icons on your desktop to access the software download pages. For instructions on installing and using your network software, click the icons on your desktop to access the online EasyMP Network Projection Operation Guide or EasyMP Monitor Operation Guide (requires an Internet connection). If you don't see the software download or guide icons on your desktop, you can install them from the projector CD or go to the Epson website, as described in "Where to get help." Project wirelessly from a mobile device You can connect your mobile device and projector using Epson iProjection™ and a QR code. Make sure the wireless LAN module is installed in your projector (optional with the EX7230 Pro) and the latest version of Epson iProjection is installed on your device. Install the Epson iProjection app To project from an iOS or Android device, download and install the Epson iProjection app. Visit epson.com/projectorapp (U.S.) or epson.ca/projectorapp (Canada) for more information. Direct wireless connection Make sure your device and Epson projector are not connected to a network and your Epson projector's Connection Mode is set to Quick. 1 Tap iProjection on your device's Home screen. 2 Tap Projector to open the Search Projector menu. • To select a number or character, use the arrow buttons on the remote control to highlight it, then press . • To switch between uppercase and lowercase letters, select CAPS and press . • To change the displayed symbols, select SYM1 or SYM2 and press . When you're finished entering the SSID, select Finish and press . 10 If you chose the Advanced connection mode, select IP settings and press . If your network assigns addresses automatically, turn on DHCP. If not, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address, as needed.  To enter numbers, use the arrow buttons on the remote control to highlight a number, then press . When you're finished entering an address, highlight Finish, then press . Press Esc. 11 To prevent the SSID and IP address from appearing on the network standby screen, set the SSID Display and IP Address Display settings to Off. 3 Tap Read QR code. 4 Point your device's camera at the QR code your projector displays; the QR code is read automatically. 5 Tap OK to register your projector's Wi-Fi profile. 6 Tap Install to install your projector's Wi-Fi profile. 7 Tap Install Now at the Unsigned Profile notification. 8 Tap Done to exit the Profile Installed screen. 9 Tap OK to confirm the connection to the projector. 10 Note the projector network name (SSID) shown on your device's screen. Then go to the Wi-Fi settings on your device to select that network. Your device and Epson projector are now connected.