Epson EX9210 Users Guide - Page 66
Setting Up Monitoring Using SNMP, Network, Enter, Network Configuration, Notifications, Others
View all Epson EX9210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Setting Up Monitoring Using SNMP Network administrators can install SNMP (Simple Network Management Protocol) software on network computers so they can monitor projectors. If your network uses this software, you can set up the projector for SNMP monitoring. 1. Press the Menu button. 2. Select the Network menu and press Enter. 3. Select Network Configuration and press Enter. 4. Select the Notifications menu and press Enter. 5. Turn on the SNMP setting. 6. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field. Note: To enter the IP address using the numeric keys on the remote control, press and hold the Num button. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). 7. If you want this projector to receive broadcasted messages over the network, select the Others menu and turn on the Message Broadcasting setting. Administrators can broadcast messages over the network using Epson Projector Management (Windows only). 8. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. 66