Epson Equity 386/25 PLUS User Manual - Page 172
IBM 16-color VGA 640x480, GEMSETUP, GEM DRIVRPK, Using the VGA Driver Setup Program on A-4
View all Epson Equity 386/25 PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Installing the Drivers If you have already installed GEM 3.0 on your computer, go to step 2 to install the GEM drivers. If you have not yet installed GEM 3.0, begin with step 1. 1. Use the instructions in the GEM documentation to install GEM 3.0 and select IBM 16-color VGA (640x480) or Compatible as your monitor. Insert the GEM 3.0 System Master Disk in drive A and log onto drive A. Then type the following and press Enter: GEMSETUP Follow the instructions displayed on the screen to complete the GEM installation. 2. Run the VGA Driver Setup program on your Utility 1 diskette to copy the GEM 3.0 drivers to your hard disk. See "Using the VGA Driver Setup Program" on page A-4 for instructions. When Setup asks for the name of the drive and directory to contain the driver files, you can accept the default pathname or enter a different one. 3. Remove the Utility diskette from drive A and insert a blank diskette. 4. Format the diskette using the MS-DOS FORMAT command. (See your MS-DOS Reference Manual for instructions.) When FORMAT prompts you for a volume label, type the following in uppercase letters and press Enter: GEM- DRIVRPK When you see the MS-DOS prompt, remove the formatted diskette. A-30 Using the VGA Utilities