Epson Equity 486SX/25 PLUS Product Information Guide - Page 2

EQUITY 486DX2/50 PLUS, EQUITY 486SX/25 PLUS, Computer Specifications - batteries plus

Page 2 highlights

Computer Specifications CPU and Memory 32-bit CPU 25 MHz system: 804865X processor, 50 MHz system: 80486DX2/50 processor System speed 25MHz regardless of CPU; for 80486DX2/50, 50 MHz speed is internal only; 8 MHz speed is simulated by inserting wait states; high/low speed selection through software or keyboard command; 0 wait state memory access at high speed System memory 4MB RAM standard soldered onto memory board; base memory of 256KB, 512KB or 640KB selectable through jumpers. Memory expandable using 256KB or 1MB SIMMS, up to 16MB (maximum); SIMMs must be fast-page mode, 80ns access speed (or faster) ROM 128KB (includes system BIOS and VGA BIOS) Shadow RAM 0 wait state access speed; automatically copies both ROM BIOS and video ROM into RAM Math coprocessor Standard for 50 MHz model; on 25 MHz model, 80486SX microprocessor can be replaced with optional 80487SX chip Cache controller 82385 (25MHz) standard Cache RAM 32KB high-speed (25ns) static RAM; twoway set associative. Clock/calendar Real-time clock, calendar, and 50-byte CMOS RAM for configuration; battery backup EQUITY 486DX2/50 PLUS EQUITY 486SX/25 PLUS Controllers Diskette Supports up to two drives in any of four formats: 5%inch, highdensity, 1.2MB; 5%inch, double-density, 360KB; 3%inch, highdensity, 1.44MB; or 31h-inch, double-density, 720KB; also supports optional Epson tape drive; controller on main system board Hard disk Supports up to two half-height drives; embedded IDE controller; interface on main system board Interfaces Monitor VGA adapter with 1MB DRAM (video memory) built into main system board; supports up to 800 x 600 or 1024 x 768 pixels in 16-colors or up to 640 x 480 pixels in 256-colors; multi-frequency monitor required for resolutions over 640 X 480 15-pin, D-shell connector Serial RS-232C, programmable, asynchronous; 9-pin, D-shell connector Parallel Mouse port Standard &bit parallel, mono-directional; 25-pin, D-shell connector Mini DIN, 6-pin connector for PS/2 compatible mouse or other device Keyboard Mini DIN, 6-pin connector for PS/2 compatible keyboard Option slots Six standard input/output expansion slots (five 16-bit ISA compatible and one 8-bit ISA compatible); 8 MHz bus speed Power Supply Type Internal; operation controllable by the Setup program 200W, fan-cooled, automatic (worldwide) input voltage sensing Input ranges Maximum outputs 98 to 132 VAC and 195 to 264 VAC +5 VDC at 22 Amps, +12 VDC at 6.8 Amps -12 VDC at .50 Amps, -5 VDC at .50 Amps Mass Storage Bays Up to five drives maximum Internal drive bay Two half-height or one full-height drives Externally-accessible One third-height and two half-height drives drive bay or one third-height and one full-height drives Equity Series Computers 5/12/92 466DX2/50 & 486SX/25 PLUS-1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

EQUITY 486DX2/50 PLUS
EQUITY 486SX/25 PLUS
Computer Specifications
CPU and Memory
32-bit CPU
System speed
System memory
ROM
Shadow RAM
Math coprocessor
Cache controller
Cache RAM
Clock/calendar
25 MHz system: 804865X processor,
50 MHz system: 80486DX2/50 processor
25MHz regardless of CPU; for 80486DX2/50,
50 MHz speed is internal only; 8 MHz
speed is simulated by inserting wait states;
high/low speed selection through software
or keyboard command; 0 wait state
memory access at high speed
4MB RAM standard soldered onto memory
board; base memory of 256KB, 512KB or
640KB selectable through jumpers.
Memory expandable using 256KB or
1MB SIMMS, up to 16MB (maximum);
SIMMs must be fast-page mode, 80ns access
speed (or faster)
128KB (includes system BIOS and VGA
BIOS)
0 wait state access speed; automatically
copies both ROM BIOS and video ROM
into RAM
Standard for 50 MHz model; on 25 MHz
model, 80486SX microprocessor can be
replaced with optional 80487SX chip
82385 (25MHz) standard
32KB high-speed (25ns) static RAM; two-
way set associative.
Real-time clock, calendar, and
50-byte CMOS RAM for configuration;
battery backup
Controllers
Diskette
Hard disk
Interfaces
Monitor
Serial
Parallel
Mouse port
Keyboard
Option slots
Power Supply
Type
Input ranges
Maximum outputs
Supports up to two drives in any of four
formats:
5%inch,
highdensity, 1.2MB;
5%inch,
double-density, 360KB;
3%inch,
highdensity, 1.44MB; or
31h-inch,
double-density, 720KB; also
supports optional Epson tape drive;
controller on main system board
Supports up to two half-height drives;
embedded IDE controller; interface on main
system board
VGA adapter with 1MB DRAM (video
memory) built into main system board;
supports up to 800 x 600 or 1024 x 768
pixels in 16-colors or up to 640 x 480 pixels
in 256-colors; multi-frequency monitor
required for resolutions over 640 X 480
15-pin, D-shell connector
RS-232C, programmable, asynchronous;
9-pin, D-shell connector
Standard &bit parallel, mono-directional;
25-pin, D-shell connector
Mini DIN, 6-pin connector for PS/2
compatible mouse or other device
Mini DIN, 6-pin connector for PS/2
compatible
keyboard
Six standard input/output expansion slots
(five 16-bit ISA compatible and one 8-bit
ISA compatible); 8 MHz bus speed
Internal; operation controllable by the Setup
program
200W, fan-cooled, automatic (worldwide)
input voltage sensing
98 to 132 VAC and 195 to 264 VAC
+5 VDC at 22 Amps, +12 VDC at
6.8 Amps
-12 VDC at .50 Amps, -5 VDC at
.50 Amps
Equity Series Computers
5/12/92
Mass Storage Bays
Up to five drives maximum
Internal drive bay
Two half-height or one full-height drives
Externally-accessible
One third-height and two half-height drives
drive bay
or one third-height and one full-height
drives
466DX2/50 & 486SX/25 PLUS-1