Epson Equity 486SX/25 PLUS User Manual - Page 128
Installing or Removing a Drive in the External Bay, Installing a Drive, 3M-inch, 5Winch
View all Epson Equity 486SX/25 PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Installing or Removing a Drive in the External Bay This section describes how to install or remove an Epson diskette drive; however, you can use these instructions to install or remove another type of storage device. See the manual that came with it for additional installation instructions. Installing a Drive On each interior side of the external drive bay, there is a plastic guide with four support grooves, as shown below. You select the appropriate grooves for your drive depending on the size of your drive and where you want to locate it. third-height drive I half-height drive The third-height diskette drive that comes with your computer is installed in the grooves at the top of the bay. Note If you are installing a 3M-inch drive that does not have a 5Winch mounting frame installed on it, follow the instructions that came with the drive to install the frame. 7-6 Installing and Removing Drives