Epson Expression 10000XL Start Here Card - Page 3
Install the Transparency Unit - photo scanner
![]() |
View all Epson Expression 10000XL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
3 Install the Transparency Unit If you have the Photo version of the scanner, you need to install the transparency unit. 1 Fully open the scanner's document cover, then lift it straight up. 2 Lower the transparency unit onto the scanner, so that the pins fit into the holes as shown. 3 Use a coin to turn the transportation lock to the Unlock position. 4 Close the transparency unit. 5 Connect the transparency unit cable to the scanner's OPTION port, then tighten its screws.
![](/manual_guide/products/epson-10000xl-start-card-a22d869/3.png)
Install the Transparency
Unit
If you have the Photo version of the scanner, you need to install the
transparency unit.
1
Fully open the scanner’s document cover, then lift it straight up.
2
Lower the transparency unit onto the scanner, so that the pins fit into
the holes as shown.
3
Use a coin to turn the transportation lock to the
Unlock
position.
4
Close the transparency unit.
5
Connect the transparency unit cable to the scanner’s
OPTION
port, then
tighten its screws.
3