Epson FX-870 Product Information Guide - Page 4

FX-870/1170 Bin capacity: Single sheets: Envelopes: MCBF: Paper: C806371 and C806391 Up to 50 sheets of 82-g/m' (22-lb) paper 006381 and C806401 Up to 150 sheets of 82-g/m* (22-lb) paper 006381 and C806401 Up to 25 (plain and bond type) Up to 30 (air mail) 100,000 cycles Paper storage conditions: Temperature: 18" to 22"C(64" to 72°F) Humidity: 40% to 60% RH Environmental Temperature: Operation: 5" to 35°C (41" to 95°F) Storage: -30" to 60°C (-22" to 140°F) Humidity (without condensation): Operation: 15%toSO% RH Storage: 5% to 85% RH Note: Cl 24-lb paper printing is available only at normal operating conditions. Cl Cut-sheet feeder envelope printing is available only with the C806381 or C806401 cut-sheet feeders and only at normal operating conditions. Front sheet guide Dimensions and weight: Printer Optlon No. Standard C814001 Wide C814011 Helght 48.5 mm 48.5 mm Width 332mnl 507mm Depth 177mm 177mm W eight 280 g 450 g Paper: Width C814001 C814011 Paper length Thickness Weight Single sheets 1 Multi-psrt forms 148 to 257 mm (5.8 to 10.1 inches) 14810364mm (5.8 lo 14.3 inches) max. 364 mm (max. 14.3 Inches) 0.085 to 0.14 mm 0.12 too.32 mm (0.0025 to 0.0054 in.) (0.0047 to 0.0125 in.) 64toQOg/m2 (40 to 58 g/m') x 4 (14 to 24 lb) [(12 to 15 lb)] x 4 Printable area: Single sheets: Same as single sheets from the top insertion. (Multi-part forms) Note: Front sheet guiak is available only at the normal operating conditions. Character Tables ESUP mode This section lists the character tables available in the ESC/P mode. You can select these character tables with the default-setting mode or by using a software command. All tables except the italic character table are the same as PC437 table for hex codes 00 through 7F, so only the PC437 and italic tables are shown completely. The rest of the tables show only the characters for hex code-s 80 through FF. PC437 (USA, Standard Europe) FX-870/1170-4 10/13/92 9-Pin Printers