Epson FX-890II Users Guide - Page 112
Cancelling Printing, Pause, Tear Off/Bin
View all Epson FX-890II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
FX-890II/FX-890IIN/FX-2190II/FX-2190IIN User's Guide Note: ❏ To print the instruction sheet and alignment patterns, you need four single sheets or four pages of continuous paper of at least the following sizes: Paper type Continuous paper Single sheet FX-890II/FX-890IIN 241 × 279 mm (9.5 × 11 inches) A4 or letter size FX-2190II/FX-2190IIN 376 × 279 mm (14.8 × 11 inches) A3 landscape ❏ If you use single sheets, you need to load a new sheet of paper each time the printer ejects a printed sheet from the sheet guide. ❏ The setting instructions are printed in the language that you set in the default-setting mode. If you want to change the language of the setting instructions, change the language setting by changing the default setting. See "Changing default settings" on page 97 for instructions on changing the default setting. Follow the steps below to perform bidirectional adjustment. 1. Make sure paper is loaded and the printer is turned off. ! Caution: Whenever you turn off the printer, wait at least five seconds before turning it back on; otherwise you may damage the printer. 2. While holding down the Pause button, turn on the printer. The printer enters the bidirectional adjustment mode and then prints instructions and the first set of alignment patterns. 3. As described in the instructions, compare the alignment patterns and select the pattern with the best alignment. Then select the pattern with the best alignment for each of the remaining sets of alignment patterns. 4. After you select the best pattern in the final set of alignment patterns and save your selection by pressing the Tear Off/Bin button, turn off the printer and exit the bidirectional adjustment mode. Cancelling Printing If you encounter problems while printing, you may need to cancel printing. Troubleshooting 112