Epson G7100 Operation Guide - EasyMP Monitor v4.57 - Page 44

An e-mail notifying the operator of a problem/warning/status is issued 44 Message Remedy Other warning See your User's Guide for more information. Other error Incorrect Installation Position/Direction Warning No signal No image signals are being received by the projector. Check the connection status and check that the power for the connected equipment is turned on. Network error (TCP connection error) Check the following items. Check that the projector's power is turned on. Check that the LAN cable is connected. Check that Standby Mode is set to Communication On (or Network On) or Network Monitoring is set to On in the projector's configuration menu. See your User's Guide for more information. Network error Check that the projector has been correctly (ESC/VP.net connected to the network. See your User's Guide for communication error) more information. Network error Check the projector's Monitor Password. (Monitor Password authentication error) No lens error Check that the lens is installed in the projector correctly. See your User's Guide for more information. * When the projector has 2 lamps, the additional information, such as (Lamp 1) or (Ballast 1), is displayed after the message so that you can know which lamp has problems/warnings. Messages to inform that the projector has recovered from the error or warning statuses are sent.